low oil pressure, possible causes??!?!?!
I've just installed a cam on my car and a ported ls6 oil pump. I haven't changed the oil yet, been driving for like 200 miles.
it reads like quarter, the line just after the zero and before 40. I checked the oil level, and its was good. I am so pissed cuz I spent all my money for now on this

please help.....
Thanks,
anything else I have to look for?!!??
if there are , that would be a good indicator of a faulty oring.
i just finished from installing a new oring, i has having lifter bleed down issues and bubbles in the oil . it turnes out that i didn't put in an oring when i put the new pump in!
i have been driving for close to 6k miles on it and my pressure seemed fine ( it would drop when the motor got warm).
how many miles on your motor?
Trending Topics
if there are , that would be a good indicator of a faulty oring.
i just finished from installing a new oring, i has having lifter bleed down issues and bubbles in the oil . it turnes out that i didn't put in an oring when i put the new pump in!
i have been driving for close to 6k miles on it and my pressure seemed fine ( it would drop when the motor got warm).
Same problem here also. The Best V8 Stories One Small Block at Time
the car sounds so mean with the cutout uncapped
I have a video of the car the first time I started it. it was fine until I hit 7Km missed 3rd and the car died
( I was on my way to a race) anyways, I will post the video once I get it on the computer.
I hope the car is fine!!!
You dont have to drop the pan. I keep reading this and I have did it twice with out droping the pan. I have seen some post were other people have did it with out droping the pan. All you need is a little skill 2 pairs of pliars and a peice of wire. 
I hope your car is going to be OK. Mine is fine, I got the hood pins installed, pics are on the Picture Trail site in my sig. The only thing "wrong" is it has started grinding 3rd gear sometimes so I think it needs a clutch/hydraulics upgrade
.Let me know when you get the video up
. wish me luck guys....

