Picked up 52rwhp with MTI C2 cam!
#42
TECH Senior Member
Re: Picked up 52rwhp with MTI C2 cam!
365 RWHP from bolt-ons is perfectly believable (although quite good.) My car is an A4 and did 359.
417 RWHP with only a cam is pretty bad-*** if you ask me.
417 RWHP with only a cam is pretty bad-*** if you ask me.
#44
Re: Picked up 52rwhp with MTI C2 cam!
Thanks, I appreciate it. I was hoping for 400rwhp and I would of been more than happy, but when Jason looked over at me with those eyes, I either knew something had to be wrong or really good! He couldnt believe it and double checked to see if I had aftermarket heads. But nope, I told them they were stock. I couldnt beleive it myself. I know I could of picked up a few more with a short belt, no air filter, a bigger y-pipe or true duals, a cut out, lighter wheels, etc. I know the car is capable of 420+, but I was happy enough so I wasnt gonna go through the trouble of doing all that just so that I could dyno more. Do you have any clue what the record is for cam only, stock heads, M6, N/A?
#45
TECH Addict
iTrader: (3)
Join Date: Jan 2003
Location: Houston/College Station, TX
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
Re: Picked up 52rwhp with MTI C2 cam!
I've been trying to decide on which cam to get and I've pretty much made up my mind on the C2. Very nice numbers, now let's get some track times.
Ryan
Ryan
#48
TECH Fanatic
iTrader: (3)
Join Date: Jul 2003
Location: Houston, Tx
Posts: 1,092
Likes: 0
Received 0 Likes
on
0 Posts
Re: Picked up 52rwhp with MTI C2 cam!
Awesome Numbers man. thats the cam i'm looking at geting, but my car is an a4, and the cost of a torque converter is holding me up. what did you pull before the tuning?
#49
Re: Picked up 52rwhp with MTI C2 cam!
Which heads do you have 241's or the 8xx heads?
#50
Re: Picked up 52rwhp with MTI C2 cam!
Awesome Numbers man. thats the cam i'm looking at geting, but my car is an a4, and the cost of a torque converter is holding me up. what did you pull before the tuning?
#51
TECH Apprentice
Join Date: Nov 2001
Location: Midland Texas
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Re: Picked up 52rwhp with MTI C2 cam!
I have that cam in my 2001 Vette with stage 1.5 heads and all the bolt ons and 3.42 gears as well and only made 414 rwhp corrected and 398 rwtq.
#52
TECH Addict
iTrader: (3)
Join Date: Nov 2001
Location: HOU - yeah, you know the rest.
Posts: 2,959
Likes: 0
Received 1 Like
on
1 Post
Re: Picked up 52rwhp with MTI C2 cam!
I have that cam in my 2001 Vette with stage 1.5 heads and all the bolt ons and 3.42 gears as well and only made 414 rwhp corrected and 398 rwtq.
#53
TECH Apprentice
Join Date: Nov 2001
Location: Midland Texas
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Re: Picked up 52rwhp with MTI C2 cam!
Texas Speed and Performance in Lubbock. They are a quality place with a huge knoweledge of LS1 performance.
I still was wanting to be around 420 rwhp but as I have been reading around maybe its not possible with a Vette and that small of a cam.
I still was wanting to be around 420 rwhp but as I have been reading around maybe its not possible with a Vette and that small of a cam.
#54
TECH Apprentice
iTrader: (6)
Join Date: Jan 2002
Location: Houston, TX
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
Re: Picked up 52rwhp with MTI C2 cam!
I had the C2 in my '99 TA last year and made 421rwhp/401rwtq with MTI stage 1 heads thru a 10-bolt with 3.73 gears. I gained a buttload of torque from 2500 to 5000 rpms over my previous Stage 1 and 221/221/.558/.558/116 cam setup. 25-30 ft.lbs. average gain in that band of rpms! The C2 cam gives you a power increase everywhere, low, mid-range, and high rpms, it simply is a proven performer.
If you want to see my dynograph just go to MTI's website and click on the Engine Section of F-bodies. Scroll down to the 475hp heads and cam package. The dynograph shown is my '99 TA with the C2 HAMMER cam.
If you want to see a dynograph of Stage 2 heads and an X1 cam, then go to the Corvette Engine Section, scroll down to the 475hp heads and cam package. The dynograph shown is David Coates SS Camaro with Stage 2 heads and X1 cam.
Randy
If you want to see my dynograph just go to MTI's website and click on the Engine Section of F-bodies. Scroll down to the 475hp heads and cam package. The dynograph shown is my '99 TA with the C2 HAMMER cam.
If you want to see a dynograph of Stage 2 heads and an X1 cam, then go to the Corvette Engine Section, scroll down to the 475hp heads and cam package. The dynograph shown is David Coates SS Camaro with Stage 2 heads and X1 cam.
Randy