thinking about putting ls6 cam and heads on my ls1
#1
TECH Regular
Thread Starter
iTrader: (31)
Join Date: Nov 2006
Location: louisiana
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i wanna know will i feel a nice difference,, how many extra horses will i pick up by just doin that and will i have to get m tuned...
#5
Launching!
iTrader: (2)
Join Date: Apr 2006
Location: Manchester, N.H
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Check my sig. I also strongly recommend a larger cam over the LS6. My 220/220 drives just as well as stock if not better(after tune). Might at well just go for a 224 cam at minimum while you're in there.
#7
TECH Fanatic
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Don't waste your time putting stock heads or a stock cam in your car. Do it right the first time. For budget minded people, I'd suggest Patriot Performance 243 casting heads with stock valves (no piston to valve clearance issues) milled to about 62ish cc's (maybe more) and at least a TR224 on 112. This is safe setup that should get you a little more than 400 to the ground.
Trending Topics
#10
Launching!
iTrader: (2)
Join Date: Apr 2006
Location: Manchester, N.H
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Will you NEED a tune?
-No
It's highly suggested though. A tune can never hurt, providing that you go to a knowlegeable shop. Lots of guys on the tech drive head/cam cars untuned for great lengths of time. But the truth is - with every mod you install, there is still something left on the table without a tune.
-No
It's highly suggested though. A tune can never hurt, providing that you go to a knowlegeable shop. Lots of guys on the tech drive head/cam cars untuned for great lengths of time. But the truth is - with every mod you install, there is still something left on the table without a tune.
#12
Staging Lane
iTrader: (12)
Join Date: May 2007
Location: Chipley, FL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Xtnct00WS6
Don't waste your time putting stock heads or a stock cam in your car. Do it right the first time. For budget minded people, I'd suggest Patriot Performance 243 casting heads with stock valves (no piston to valve clearance issues) milled to about 62ish cc's (maybe more) and at least a TR224 on 112. This is safe setup that should get you a little more than 400 to the ground.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#13
TECH Resident
iTrader: (48)
Join Date: Nov 2001
Location: Michigan, the land of cold
Posts: 927
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Expected fuel consumption is directly proportionate to your ability to keep your foot off the accelerator.
Tuning is always recommend, even if you are BONE STOCK. GM leaves some HP on the table, and if you are good you can get it back.
Tuning is always recommend, even if you are BONE STOCK. GM leaves some HP on the table, and if you are good you can get it back.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#14
TECH Fanatic
iTrader: (5)
Join Date: Aug 2005
Location: HURST, TX
Posts: 1,171
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i just bought some LS6 heads, now i'm saving up for some porting to be done and then i'll pick a cam...... get a tune no matter what, your car will run so much better and like said above, you will pick up extra horses
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
#15
Staging Lane
iTrader: (12)
Join Date: May 2007
Location: Chipley, FL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ChevyThunder17
Expected fuel consumption is directly proportionate to your ability to keep your foot off the accelerator.
Tuning is always recommend, even if you are BONE STOCK. GM leaves some HP on the table, and if you are good you can get it back.![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Tuning is always recommend, even if you are BONE STOCK. GM leaves some HP on the table, and if you are good you can get it back.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#16
TECH Resident
iTrader: (48)
Join Date: Nov 2001
Location: Michigan, the land of cold
Posts: 927
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Depends on the car really. With mass production engines, it's really weird. Maybe 10, maybe 30. I know that the 4.2L in the Trailblazer has about 40 hanging around in it.
You turn off torque management, tweak the timing tables, run 93 octane. GM has two timing tables, Hi and Low. It goes between the two dynamically. So you narrow the range between the two and keep the timing up. Wa-la, instant horsepower.
You turn off torque management, tweak the timing tables, run 93 octane. GM has two timing tables, Hi and Low. It goes between the two dynamically. So you narrow the range between the two and keep the timing up. Wa-la, instant horsepower.
#17
Staging Lane
iTrader: (12)
Join Date: May 2007
Location: Chipley, FL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ChevyThunder17
Depends on the car really. With mass production engines, it's really weird. Maybe 10, maybe 30. I know that the 4.2L in the Trailblazer has about 40 hanging around in it.
You turn off torque management, tweak the timing tables, run 93 octane. GM has two timing tables, Hi and Low. It goes between the two dynamically. So you narrow the range between the two and keep the timing up. Wa-la, instant horsepower.
You turn off torque management, tweak the timing tables, run 93 octane. GM has two timing tables, Hi and Low. It goes between the two dynamically. So you narrow the range between the two and keep the timing up. Wa-la, instant horsepower.
Sweet. I plan on putting the car on a dyno in two weeks. Maybe I can get a tune after that.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#18
TECH Resident
iTrader: (48)
Join Date: Nov 2001
Location: Michigan, the land of cold
Posts: 927
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No problem.
I would tell you to look into getting yourself an HP Tuners setup if you are really that into the idea.
Same goes for the original poster of this thread. Get tuned, do it yourself if you are up for it.
There are plenty of resouces available to assist you.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Same goes for the original poster of this thread. Get tuned, do it yourself if you are up for it.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#19
Staging Lane
iTrader: (12)
Join Date: May 2007
Location: Chipley, FL
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by ChevyThunder17
No problem.
I would tell you to look into getting yourself an HP Tuners setup if you are really that into the idea.
Same goes for the original poster of this thread. Get tuned, do it yourself if you are up for it.
There are plenty of resouces available to assist you.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Same goes for the original poster of this thread. Get tuned, do it yourself if you are up for it.
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
I'd like to. What does that HP Tuners setups consist of?? Something I would use with my laptop or is it stand alone?? Could it clear my SES code from removal of the AIR system as well?
#20
TECH Resident
iTrader: (48)
Join Date: Nov 2001
Location: Michigan, the land of cold
Posts: 927
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by speedy_2
I'd like to. What does that HP Tuners setups consist of?? Something I would use with my laptop or is it stand alone?? Could it clear my SES code from removal of the AIR system as well?
Check out the website.