TFS 215 head gaskets?
TFS 215 head gaskets? Im expecting my TFS 215 heads this week 
and was wondering what gaskets to use.Do i use stock gaskets because of the ptv clearence(heads are milled to 61cc)or do i go with some cometic .40 gaskets.Also...what else as far as bolts and studs do i need to use with these heads...basicly what do i need as far as everything (gasket/head bolts) to put these heads on...thanks in advance guys
and was wondering what gaskets to use.Do i use stock gaskets because of the ptv clearence(heads are milled to 61cc)or do i go with some cometic .40 gaskets.Also...what else as far as bolts and studs do i need to use with these heads...basicly what do i need as far as everything (gasket/head bolts) to put these heads on...thanks in advance guys Last edited by RedDemonLsX; Jun 25, 2007 at 05:31 PM.
head bolts/ studs whichever you choose. i chose arp bolts. im using a .045 cometic gasket also. quite a bit more money than the stock gaskets. you will also need a set of roller rockers as the stock ones wont work. other than that you should be golden.
