im having to send my computer back for some idleing issues, so i thought i would mess the shift points. i have an f13 cam on a stock A4 and bottom end. the current shift points are at 6000 RPM. the cam just starts to pull hard around then so i want to extend the shiftpoints as far as i can without hurting the stock 100k mile A4 or bottomend.
i was thinking 6200 RPM, do you guys think that is safe or stick to 6k? any input is apreciated, thanks

 

anybody have a idea how far i should spin this motor?

 

I had the F13 in my old Z28 and the shift points were set at 6400

 

did you have stock A4? bottem end? im thinking of going 6200 RPM

 

The cam itself is good for 6500 rpm +/-, I got a solid 6400+ worth of power on it from my stock bottom end LS1 with the same cam and an LS6 intake

 

The A4 in mine was a basic rebuild and yes the bottom end was stock. The best it ran on motor was a 7.47 @ 92. Car was cam only at the time with TCI 3K stall, lid, LCAs and 2.73s.