ok with the mods in my besides the cam which cam would u recommened??? i have 806 race ported heads w/ dual springs,ti retainers,lock, seats, and i want a cam thats gonna push out a good amount of hp but street able i was thinking either the ms3,233/239, torquer v.3 if u have any suggestion let me know... thanks..

 

Either the TR224 or the TSP 228R, for good streetablity and good under the curve power

 

can u make an estimate of what hp i should be at with the mods in my sig and yes im gonna get a tune also... any help is appreciated thanks!

 

not sure what 806 ported heads are but with heads, that cam, and big stall i would think somewhere around 400. that stall is going to eat some of your power on the dyno. even though it might not dyno fantastic numbers it should run like a beast.

 

thanks silver, i just want a car capiable of eating 03 cobras.

 

what are the flow numbers on your heads, what size valves, what do you want to spin to, and what intake are you using,?

 

can remember the specs on the head work i have pic and i know he told me they have a five angle valve job on em!!! ill send the link so u can look at the pics....

 

 

here's more...

 

chek out the port work on my heads...