East Side Performance 1st Cam Only Bolt On Package (431 RWHP)
02-02-2003, 09:46 AM
#81
Teching In
Join Date: Jan 2003
Location: Westchester, NY
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Its a wonder why we even have sponsors these days w/ this level of skepticism... I am very interested in this cam of course, but I am waiting to see numbers at the track before raising any flags... I cant believe people as informed as you guys on this forum are this quick to start bickering about dyno tricks...
East Side has done us a great service by researching this stuff out, and the way we repay them is by doubting every little detail?? I think in the next three months it will be very clear as to whether these numbers are for real, and I would advise people to wait till then and see..
I have owned an ls1 for 5 months and in that time alone I have seen the bar raised for our performance potential, I don't see any reason why it shouldn't continue.
I would also like to add that I have spoken w/ most sponsors in the tri state area ( i am not gonna name any names) about my upcoming header install, and Kenny has given me an UNMATCHED level of information and customer service.
East Side has done us a great service by researching this stuff out, and the way we repay them is by doubting every little detail?? I think in the next three months it will be very clear as to whether these numbers are for real, and I would advise people to wait till then and see..
I have owned an ls1 for 5 months and in that time alone I have seen the bar raised for our performance potential, I don't see any reason why it shouldn't continue.
I would also like to add that I have spoken w/ most sponsors in the tri state area ( i am not gonna name any names) about my upcoming header install, and Kenny has given me an UNMATCHED level of information and customer service.
02-02-2003, 10:15 AM
#82
TECH Fanatic
Join Date: Aug 2002
Location: CT
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) thanks for understanding we posted the flywheel right at the begining so people will know
keep in mind that this car is not owned by us
it is owned by rambird2002 we asked for his car because we know he would be a great partner in putting the car together,taking it to the track,plus it was a 6 speed,stock rear and tires
hopefully we can have heads on it in a couple of weeks
couple of other things i tought up after night
1.me personnally would never believe these numbers if i didnt see it my self,the first cam had a lot of lift and i firgured this cam was going to be a puppy.the chef,nogo and rambird2002 and myself were all breaking guys chops as we changed it on the dyno (this cam was my parnter guys baby)
2.I can tell you guys this by the end of the summer their will be head and cam cars (346)
making close to 500 hp because the big companys
(lg,cartek,mti,)are making great strides in engine power,ie;what we have found the more things change the more they stay the same.
they still like big big cams,compression,
the kicker is with edit and tuners like kevin (nogo) they can make anything run
(when we go to texas our car will have stock computer,no 02s,no mass air,run on leaded gas,)
thanks again for putting up with my book
we will keep you upated thru out the week
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
keep in mind that this car is not owned by us
it is owned by rambird2002 we asked for his car because we know he would be a great partner in putting the car together,taking it to the track,plus it was a 6 speed,stock rear and tires
hopefully we can have heads on it in a couple of weeks
couple of other things i tought up after night
1.me personnally would never believe these numbers if i didnt see it my self,the first cam had a lot of lift and i firgured this cam was going to be a puppy.the chef,nogo and rambird2002 and myself were all breaking guys chops as we changed it on the dyno (this cam was my parnter guys baby)
2.I can tell you guys this by the end of the summer their will be head and cam cars (346)
making close to 500 hp because the big companys
(lg,cartek,mti,)are making great strides in engine power,ie;what we have found the more things change the more they stay the same.
they still like big big cams,compression,
the kicker is with edit and tuners like kevin (nogo) they can make anything run
(when we go to texas our car will have stock computer,no 02s,no mass air,run on leaded gas,)
thanks again for putting up with my book
we will keep you upated thru out the week
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
02-02-2003, 03:37 PM
#83
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) I am still curious of what the maf rate was on this car in particular.. If it was tuned using ls1edit and monitored by some scan tool I am sure someone knows what the maf rate was...
02-02-2003, 04:20 PM
#85
TECH Enthusiast
Join Date: Aug 2002
Location: Los Angeles
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Wild claims like this should not be made unless the sponsor is willing to provide informaton to the consumer. No specs on the cam were provided. We are simply told that they will be provided later. <img border="0" alt="[bullshit]" title="" src="graemlins/gr_bs.gif" /> Let the buyer beware!! <img border="0" alt="[shoot]" title="" src="graemlins/gr_guns.gif" />
02-02-2003, 05:08 PM
#87
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by SSDude:
<strong> Wild claims like this should not be made unless the sponsor is willing to provide informaton to the consumer. No specs on the cam were provided. We are simply told that they will be provided later. <img border="0" alt="[bullshit]" title="" src="graemlins/gr_bs.gif" /> Let the buyer beware!! <img border="0" alt="[shoot]" title="" src="graemlins/gr_guns.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Here we go again <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" /> God people, there are more important things in life to get worked up over than cam specs, dyno #'s, MAF rates, ect. If you are stressing because a shop doesn't want to give out info you want, call someone who cares. Give these shops that are putting up bigger numbers a pat on the back or stfu and paitently wait for track times. Cause you may be looking like some idiots when the do come out.
<strong> Wild claims like this should not be made unless the sponsor is willing to provide informaton to the consumer. No specs on the cam were provided. We are simply told that they will be provided later. <img border="0" alt="[bullshit]" title="" src="graemlins/gr_bs.gif" /> Let the buyer beware!! <img border="0" alt="[shoot]" title="" src="graemlins/gr_guns.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Here we go again <img border="0" title="" alt="[Roll Eyes]" src="images/icons/rolleyes.gif" /> God people, there are more important things in life to get worked up over than cam specs, dyno #'s, MAF rates, ect. If you are stressing because a shop doesn't want to give out info you want, call someone who cares. Give these shops that are putting up bigger numbers a pat on the back or stfu and paitently wait for track times. Cause you may be looking like some idiots when the do come out.
02-02-2003, 05:25 PM
#88
LS1Tech Co-Founder
iTrader: (34)
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Interesting numbers keep us posted.
For the skeptics, it's nice to show you are skeptical. But like in any converstion, saying the same thing over and over gets old. Your point is made with one post.
I am personally very curious to see some of these cars run some numbers.
Keep these package threads civil.
For the skeptics, it's nice to show you are skeptical. But like in any converstion, saying the same thing over and over gets old. Your point is made with one post.
I am personally very curious to see some of these cars run some numbers.
Keep these package threads civil.
02-02-2003, 05:26 PM
#89
LS1Tech Co-Founder
iTrader: (34)
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Interesting numbers keep us posted.
For the skeptics, it's nice to show you are skeptical. But like in any converstion, saying the same thing over and over gets old. Your point is made with one post.
I am personally very curious to see some of these cars run some numbers.
Keep these package threads civil.
For the skeptics, it's nice to show you are skeptical. But like in any converstion, saying the same thing over and over gets old. Your point is made with one post.
I am personally very curious to see some of these cars run some numbers.
Keep these package threads civil.
02-02-2003, 05:30 PM
#90
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Is this turning into ls1.com? We cant ask questions now? Telling me the maf rates is not telling me any specs? I feel if they are not ready to give out that information. They should only post when they are ready..
<small>[ February 02, 2003, 05:32 PM: Message edited by: VINCE ]</small>
<small>[ February 02, 2003, 05:32 PM: Message edited by: VINCE ]</small>
02-02-2003, 06:30 PM
#91
FormerVendor
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Just FYI, the MAF rate on a 450rwhp blower car will be higher than the MAF rate on a 450rwhp N/A car.
02-02-2003, 06:39 PM
#92
TECH Fanatic
Join Date: Aug 2002
Location: CT
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) kevin handles all tuning for our shop
he is in california for 2 weeks
he will check in here during the week
when he does he will post maf info
he is in california for 2 weeks
he will check in here during the week
when he does he will post maf info
02-02-2003, 06:57 PM
#93
Teching In
Join Date: Dec 2002
Location: CT
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) ken I have some questions about the Y-pipe that (YOU) built. How much is that going to be. How much time did (YOU) Have in developing that. What king of merge collector was it that (YOU) came up with ? what type of y collector did (YOU) use? Just interested seeing as you have all this time in developing these things.
02-02-2003, 06:59 PM
#94
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Does anybody at Eastside Performance
care to answer me?
I'd say by consistantly ignoring me
you don't want to sell anything.
That's fine.
I've got time to see results and make
my decision.
Sorry to bother you.
Does anybody at Eastside Performance
care to answer me?
I'd say by consistantly ignoring me
you don't want to sell anything.
That's fine.
I've got time to see results and make
my decision.
Sorry to bother you.
02-02-2003, 07:04 PM
#95
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 01-Z:
<strong> <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Does anybody at Eastside Performance
care to answer me?
I'd say by consistantly ignoring me
you don't want to sell anything.
That's fine.
I've got time to see results and make
my decision.
Sorry to bother you. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Why don't you freakin call them up big guy? Someone delete this thread, the children are taking over.
<strong> <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Does anybody at Eastside Performance
care to answer me?
I'd say by consistantly ignoring me
you don't want to sell anything.
That's fine.
I've got time to see results and make
my decision.
Sorry to bother you. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Why don't you freakin call them up big guy? Someone delete this thread, the children are taking over.
02-02-2003, 10:21 PM
#96
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 01-Z:
<strong> <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Does anybody at Eastside Performance
care to answer me?
I'd say by consistantly ignoring me
you don't want to sell anything.
That's fine.
I've got time to see results and make
my decision.
Sorry to bother you. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">feel free to call Kenny he is ready to answer any and all ?? and he will have the car flatbeded all the way to NED to prove the #s for all of the nay sayers and CT ot NH is not down the street and he will have to pay for this so he is willing to back up what he says/builds and the car will be at the track soon and when the heads come in just wait <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
ken if ya want i will even take the ride with you to NH <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
<strong> <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Does anybody at Eastside Performance
care to answer me?
I'd say by consistantly ignoring me
you don't want to sell anything.
That's fine.
I've got time to see results and make
my decision.
Sorry to bother you. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">feel free to call Kenny he is ready to answer any and all ?? and he will have the car flatbeded all the way to NED to prove the #s for all of the nay sayers and CT ot NH is not down the street and he will have to pay for this so he is willing to back up what he says/builds and the car will be at the track soon and when the heads come in just wait <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
ken if ya want i will even take the ride with you to NH <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
02-02-2003, 10:23 PM
#97
TECH Fanatic
Join Date: Aug 2002
Location: CT
Posts: 1,017
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) 01-Z were not ingoring you were just a couple of weeks from selling anything
MRC
I wish (I) could take credit for that exhuast system but (I) can take credit for surrounding myself with great people ie;Kevin(nogo)Guy,Rich,and Bill
All the exhuast and chassis parts we hope to sell come from Jamie Miller Race cars He does all the R&D on those items and we get the credit
He builds the exhuast using his circle track experience with is one of the reasons that (I) feelthis car performs so well.
He is not a sponsor so any one who wants info on his great product give me a call <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
MRC
I wish (I) could take credit for that exhuast system but (I) can take credit for surrounding myself with great people ie;Kevin(nogo)Guy,Rich,and Bill
All the exhuast and chassis parts we hope to sell come from Jamie Miller Race cars He does all the R&D on those items and we get the credit
He builds the exhuast using his circle track experience with is one of the reasons that (I) feelthis car performs so well.
He is not a sponsor so any one who wants info on his great product give me a call <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />
02-02-2003, 10:33 PM
#99
On The Tree
Join Date: Jun 2002
Location: CT
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Hail to the circle tracker's (my #1 love for racing). Like the late, great DALE EARNHARDT said "weather the love you or hate you, they still are talkin about you......"
"EARNHARDT" The Man, The Myth, The Legend <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" />
"EARNHARDT" The Man, The Myth, The Legend <img border="0" alt="[worship]" title="" src="graemlins/gr_hail.gif" />
02-02-2003, 10:35 PM
#100
On The Tree
Join Date: Jun 2002
Location: Wallingford CT
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: East Side Performance 1st Cam Only Bolt On Package (431 RWHP) Ken never said HE developed the exhaust. You need to take a pill MRC. But then again looks like I've seen this attitude once before. Can anyone say EGO KILLER. I think we all know what MRC stands for and you should be the last one starting with ken.