Who cnc ports used heads?
#1
Teching In
Thread Starter
iTrader: (7)
Join Date: Oct 2007
Location: Los Angeles
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Who cnc ports used heads?
Anybody know who cnc ports used heads, and what it costs? Ive got a set of 243 heads, and im trying to decide if i should get them ported, or sell them and buy new ported stage 2.5's.. Thanks!
BTW im in So Cal, a local shop would be best...
BTW im in So Cal, a local shop would be best...
#3
LS1Tech Premium Sponsor
iTrader: (4)
We offer cnc poring on the customers castings. Checkout PRC results in the dyno section, I think you'll find nothing but great results!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#6
Banned
iTrader: (10)
Trending Topics
#9
FormerVendor
iTrader: (18)
Give me a call when you get a chance and we can discuss what options you are looking at. To make your heads identical to our Stg.1 LS6 heads, you would be looking at $650. This will include CNC porting, CNC valvejob, blending, decking, and assembly. Upgrading valve size, springkit, ect. are all options we can have done for you as well. Also, we can set the valvejob up to allow you to run several of the larger cams on the market today!