what cam is best for an all around pulling street cam
06-26-2003, 09:44 AM
#1
Teching In
Thread Starter
Join Date: Jun 2003
Location: Tampa, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
what cam is best for an all around pulling street cam since most racing isnt done from a stop, what cam is the best from low mph pulls to top end? i have an A4 so i will have to get tuning done 
06-26-2003, 10:33 AM
#4
TECH Fanatic
iTrader: (2)
Join Date: Nov 2001
Location: Michigan
Posts: 1,153
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam is best for an all around pulling street cam I really like the low rpm torque of my TR220, but I'm going to be stepping up to the TR224 in the near future for a little more high rpm power 
06-26-2003, 10:45 AM
#5
Teching In
Thread Starter
Join Date: Jun 2003
Location: Tampa, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam is best for an all around pulling street cam what do u guys think of the lpe gt2-3 cam? i heard it has a nice range through the rpms, i thought about the combo like you have 1Mean, i have an A4 so i would def have to get it tuned
06-26-2003, 11:12 AM
#6
TECH Resident
Join Date: Nov 2001
Location: NC
Posts: 929
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam is best for an all around pulling street cam I would say just about any sponsors cam with 550-580 lift with duration in the 219-224 area. Way too many selections to say one is better than the other becuase their specs are so damn close. I prefer a 112 with +2-+4 advance.
06-26-2003, 12:58 PM
#7
Teching In
Thread Starter
Join Date: Jun 2003
Location: Tampa, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam is best for an all around pulling street cam what are the advatages/disadvantages of a high lsa and same thing with a lsa of lets say 112/114?
Trending Topics
.
06-26-2003, 01:12 PM
#9
Teching In
Thread Starter
Join Date: Jun 2003
Location: Tampa, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam is best for an all around pulling street cam so a higher lsa will idle better then? which makes a better torque curve? juice, whats the specs on ur cam? i'm starting to lean towards a 224/224 .581/.581 114lsa style
06-27-2003, 09:02 AM
#12
Re: what cam is best for an all around pulling street cam You really can't go wrong with a 224 cam, we sell alot of the 224R cams with 581 lift. I've also had a 220 cam in my Silverado & it also has a great idle & good low end power
Jason
Jason
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
06-30-2003, 07:12 AM
#13
Teching In
Thread Starter
Join Date: Jun 2003
Location: Tampa, FL
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: what cam is best for an all around pulling street cam im pretty much set on a 224/224 cam or 224/228 w/ .581/.581 with a 114lsa, maybe with +2 advance, thanks for the advice guys
