Dyno tomorrow,guess numbers
Dyno tomorrow,guess numbers Well, I am going to the dyno tomorrow to do some tuning,just wanted to see if anyone wanted to try to guess what it'll put down,just for kicks.
02 T/A pacesetter LTs,off road y,with 3"bullet dumped,lid,LS6 intake,ported throttle body, .235 .239 .600 .585 113+4 cam.
The car made 323hp 339tq bone stock.. any guesses?
02 T/A pacesetter LTs,off road y,with 3"bullet dumped,lid,LS6 intake,ported throttle body, .235 .239 .600 .585 113+4 cam.
The car made 323hp 339tq bone stock.. any guesses?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
It was a dyno jet,dyno..
After looking over some stuff.it seems that the map sensor readings were falling off in the higher rpms,any ideas on cause or fix for that..Thanks
After looking over some stuff.it seems that the map sensor readings were falling off in the higher rpms,any ideas on cause or fix for that..Thanks
could be valve float... who made the cam, comp cams? what lobe profiles does it have? xfi? lsk? ect ect... some of those big cams are rough on valve train parts.
The map pressure falling off indicates that there is an air restriction,so Im going to try to find out,if its the throttle body or maf or something else,I dont think its the intake..
