discostu

i know this is a camaro spot. but you guys help alot of people in the info department so here is the problem. i have a buddy building a low compression 454 for a nova. He is wanting 600ft lbs and 600 horse i am just looking for a manufacturer that produces around 190cc runner heads. but the heads also need to be able to hold a .800 lift. he wants to run pump gas. he says this size will have torque down low for the launch. any help will be welcomed

QuickSilver

iTrader: (22)

190cc runner on a BBC not happenening.
smallest offered by trickflow is 280 and those are an oval port they make great power though.
Josh

discostu

i did not understand the concept of such a small runner but that is what he said he needed. so i told him i would try.

THEBRAD

iTrader: (3)

u gave small block runner size for a big block. is it a small block or a big block? cause i know world industries makes 454 small blocks soo?

discostu

all he stated was 454. i am most certain he found it in an old truck so i would say big block.

THEBRAD

iTrader: (3)

a 454 can make 600hp 600lbs with less than .800 inch lift on the cam and i would also highly recomend no having that much lift on a small intake runner cause more than likely he'll have a good amount of duration on that big of a cam and the heads wont flow enough to take advantage of it. but if he wants a head good to .800, id suggest brodix heads, either the BB-2 PLUS(312cc intake runners) or the BB-2 XTRA(365cc intake runners). they run between 1000 and 1200 a piece