MTI X1+A4+STOCK HEADS= 70 rwhp gain!!
#1
MTI X1+A4+STOCK HEADS= 70 rwhp gain!!
i know this belongs in the dyno section, but i just wanted to give a big thanks to MTI for the work and tuning..
but i wanted to personally thank MTI, predator z, patrick g, jaSSon, wilwaxu, beardWS6, zrocket, bad2000z, 1bad02ws6, CRAGER, and everybody else that i have bugged and pm..
the baseline was 322/333 with just slp lid, pacesetter longtubes w/ory, magnaflow catback and ported TB, and 2.73...
with the only additions of the MTI X1 and vig 3200 it put down 393/345 to the wheels.. thats stock heads, no underdrive pulley, and still 2.73. they still need to install the pulley and 3.73!! so thats close to 400rwhp stock heads!!!
but i wanted to personally thank MTI, predator z, patrick g, jaSSon, wilwaxu, beardWS6, zrocket, bad2000z, 1bad02ws6, CRAGER, and everybody else that i have bugged and pm..
the baseline was 322/333 with just slp lid, pacesetter longtubes w/ory, magnaflow catback and ported TB, and 2.73...
with the only additions of the MTI X1 and vig 3200 it put down 393/345 to the wheels.. thats stock heads, no underdrive pulley, and still 2.73. they still need to install the pulley and 3.73!! so thats close to 400rwhp stock heads!!!
Trending Topics
#10
definitely mark!! when the baseline put down 322/333 i was like not so bad. but my goal was to make 385 atleast..lol. but MTI exceeded that and put down 393...i was like no f*ckin way!! as far as heads that will definitely be in the future. just gotta save up for the tranny..
#17
TECH Fanatic
iTrader: (6)
Join Date: May 2004
Location: Katy, Texas
Posts: 1,381
Likes: 0
Received 0 Likes
on
0 Posts
The numbers look off with the torque being that low. I think those 2.73's are screwing with your numbers.
Its just a dyno though.
Enjoy it!
Its just a dyno though.
Enjoy it!
Last edited by JScamaro; 02-24-2008 at 06:35 PM.