Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

LS1 power capabilities

Thread Tools
 
Search this Thread
 
Old 03-31-2008, 03:16 PM
  #21  
TECH Apprentice
 
deuce_454's Avatar
 
Join Date: Nov 2006
Location: Copenhagen
Posts: 369
Likes: 0
Received 0 Likes on 0 Posts
Default

priced the92mm setup?? its 1200 bucks and so are the heads... so for 2500 bucks its yours,, ill even throw in an LS6 intake and ls6 TB no charge... the turbo will deliver 850 Hp and not break a sweat.. should come on at 2000 rpm... all components are matched,
Old 03-31-2008, 05:01 PM
  #22  
On The Tree
 
Red98C5's Avatar
 
Join Date: Jan 2002
Location: Brick, NJ
Posts: 120
Likes: 0
Received 0 Likes on 0 Posts

Default

I have two buddies with C-5's that are using the APS twin turbos. Last week, on 17" M/T drag radials the one car ran 9.94 @ 139 (with back up runs and driving to and from the track) the second car did not run but last time went 10.04 @ 138. The 9 sec car has an A4 with 3.15 gears and the second car has an A4 with 3.42 gears, and both run on pump gas, and have the OEM LS-1 heads (not 243's). Also both are using the GM cams, not aftermarket!



Quick Reply: LS1 power capabilities



All times are GMT -5. The time now is 04:42 AM.