Livernois Stage 3 vs Patriot CNC's
#28
TECH Resident
iTrader: (11)
Join Date: Jan 2007
Location: Oklahoma City
Posts: 836
Likes: 0
Received 0 Likes
on
0 Posts
I had no problems on the site. http://www.livernoismotorsports.com/home.phtml
#29
12 Second Club
iTrader: (97)
Livernois Stage II Heads
- New GM 243 casting
- 5 axis CNC machined
- Fully assembled
- 220cc Intake Runner
- Intake Flow Rate 305 CFM
- Exhaust Flow Rate 235 CFM
- New 2.000 intake valves / 1.550 exhaust valves
- GM valve seals
- Super 7 locks
- Livernois dual coil valve springs good to ~ .690 lift
- Livernois titanium retainers
- No core required
- New GM 243 casting
- 5 axis CNC machined
- Fully assembled
- 220cc Intake Runner
- Intake Flow Rate 305 CFM
- Exhaust Flow Rate 235 CFM
- New 2.000 intake valves / 1.550 exhaust valves
- GM valve seals
- Super 7 locks
- Livernois dual coil valve springs good to ~ .690 lift
- Livernois titanium retainers
- No core required
#34
TECH Addict
iTrader: (5)
I'll second the friendliness and helpfulness of the staff. I wish I had the funds to try several different heads/cams. It's kind of fun, but just not something I could pull off. http://www.livernoismotorsports.com/...Cylinder+Heads
#35
On The Tree
iTrader: (18)
Join Date: Jun 2006
Location: League City, TX
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Our heads flow great and there are no "mystery" parts in our heads. Only the best valves, spring kit, guides, seals, etc. Each set comes with its own flow sheet that is specific to that set of heads. There are several choices out there today. Many of course where not covered by the article in GMHT. Check out this article about a head cam package we did for GMHT http://www.gmhightechperformance.com...z28/index.html.
We can do these heads, cam, and pushrods for $1450.00 plus shipping. Keep in mind this our "budget" CNC ported 243's that flow around 300. Our stage III heads on a 3.905" bore are going to flow around 312 and 320 on a 4.030" bore. These will also have excellent .200"-.500" flow numbers. Keep in mind when you are looking at flow numbers to pay attention the bore size used during testing.
If we can help in any way with your combination, please let us know.
We can do these heads, cam, and pushrods for $1450.00 plus shipping. Keep in mind this our "budget" CNC ported 243's that flow around 300. Our stage III heads on a 3.905" bore are going to flow around 312 and 320 on a 4.030" bore. These will also have excellent .200"-.500" flow numbers. Keep in mind when you are looking at flow numbers to pay attention the bore size used during testing.
If we can help in any way with your combination, please let us know.
#36
On The Tree
Join Date: Sep 2006
Location: Port Huron
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
#38
On The Tree
Join Date: Sep 2006
Location: Port Huron
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
that car was sweet one of my favorite ones. i really liked the black z06 rick took me for a ride in too. that was sweet. me and dave was always havin fun tryin this and that.