I am thinking about going with the torquer v.3 cam from texas speed. Has anyone used it or know anyone that has. Any info on its performace would be great. thanks.

 

To be short, its a great cam. Just search for it, or my username, and you'll find plenty of comments.

Welcome aboard by the way!

 

thanks. wouldnt happen to have a sound clip would you?

 

What other mods do you have? Are you an A4 or M6? I ran the T3 for 2 years. Its a nice cam...and yes you will get the choppy sound you are looking for.

Do a search for my User Name in the Dyno section and youi can see my graph. It was posted around November '06.

Welcome to the Board.

R/

Frat

Whats up, Brew!!

 

Its a 98 z28 m6 mac headers, off road y pipe with cut out and a flowmaster, fast 92/92, k&n fipk, granatelli maf, prc 2.5 heads, rollmaster timing set, ported ls6 oil pump, fast 36 lb injectors, fuel pump kit, under drive pullys, ram powergrip w/ billet flywheel, 3.73 gears and tune. i think that is it.

 

^^damn

 

Well sounds like you're on your way lol. Yeah there is a sound clip at idle and a little driving. I think there's even a race I had in the multimedia section or something. Sorry if I get some time tomorrow I'll post some of it here if you cant find it. Frat has some good comments about it also, try Phenomic too he has it. There's plenty of us out there!

Whats up Frat?! I'll be PMing you soon.

 

thanks for the help. i would like to hear your sound clip if you get time to post it.

 

Dude,

Your there... your mods will compliment that cam nicely. You'll have to take it back for a retune....maybe some tweaking to the VE table, idle, rescale the MAF...ect...

R/

Frat

 

WHERE IN SC ARE YOU FROM? And btw welcome!!

 

Its a nice cam, it felt like too much cam for me for a DD, but you sound like it wont bother you. It has a nice rough lopy idle, its stilll a mild cam and will make great power.. I had experience with it for only one day, so I cant say too much about it.. But all I heard was excellent things from it...

 

thanks for all of the input. i am from around the myrtle beach area. how about you?

 

Hope these help...

 

sounds great. hope mine will sound that good. in the first one did you open the cut out towards then end?

 

Yessir

 

http://www.youtube.com/watch?v=fUJd0Et2CSY

 

sounds nice. how do you like the performance?

 

I would love to see some actual info on how this cam performs. How is the torque? Horsepower? Where does it begin to pull? I would also love to see some of you that actually have the cam, go out and gets some video of the tach/speedometer on a WOT run. Best way to judge how they perform.

 

TV3 is a nice performing cam but for DD I am not fond of that .643 intake lift.

 

I am a newbie to this but what reasons would you not be fond of a .643 intake lift? Is it hard on valvetrain? Does it efect drivability? Etc.........