Picture of FAST "LSXR" 102mm for LS3/L92 Heads
02-24-2009, 03:29 PM
#21
Teching In
Join Date: Sep 2005
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Just a guess. But maybe that was because the cathedral port head was all that was out when the Fast 90 was first made. Definitely all that had a large market to sell to. 
Remember that they made the FAST 90 and then 92mm for the cathedral port headed guys first...this one for the rectangular port heads has been a long time coming and is past due!
Side note: I sure wish we'd be able to get one of the clear manifolds like they had on exhibit at PRI! That would be bad ***!
Side note: I sure wish we'd be able to get one of the clear manifolds like they had on exhibit at PRI! That would be bad ***!
03-03-2009, 11:57 AM
#22
11 Second Club
iTrader: (6)
Join Date: Sep 2006
Location: Bay Area, CA
Posts: 693
Likes: 0
Received 0 Likes
on
0 Posts
From Vengeance Racing's Website:
"FAST 102mm L92/LS3 Intake - The intake we have all been waiting for!!!! Set to release March 09, Vengeance Racing will be one of the first performance shops in the
country to have this intake available. Pricing is TBD. Initial testing shows gains of 14/11 on a STOCK LS3. Vengeance Racing will be testing this intake on several different combos including our 503/449 LS3 C6. Stay Tuned for results and pricing!!!!!"
"FAST 102mm L92/LS3 Intake - The intake we have all been waiting for!!!! Set to release March 09, Vengeance Racing will be one of the first performance shops in the
country to have this intake available. Pricing is TBD. Initial testing shows gains of 14/11 on a STOCK LS3. Vengeance Racing will be testing this intake on several different combos including our 503/449 LS3 C6. Stay Tuned for results and pricing!!!!!"
Hope fast didnt get bought out by Weiand
03-03-2009, 08:21 PM
#26
03-06-2009, 10:40 AM
#27
We are also waiting on it to come out as we ARE the first shop to get these manifolds. We will have a handfull the very instant they are available for pick up at F.A.S.T. Will will have indepent dyno numbers and pictures within hours of pick-up! Keep tuned.....
03-07-2009, 10:48 AM
#32
03-09-2009, 02:01 PM
#33
Yes it is true that we are in memphis with Comp. We also did the first test fitting on this manifold for F-body and GTO..... but truth be told we just happen to be the first shop to get our order in.
