Tall ebay valve covers
Tall ebay valve covers Has anyone used ebay valve covers? http://cgi.ebay.com/ebaymotors/SBC-C...item2c53a3b8b4
I just bought a pair of valve covers that look exactly like those, but mine are not polished. I am having mine machined to fit breathers on both covers so that I can eliminate my pcv system. The same gaskets and bolt set came with mine, so I am pretty sure they are made by the same company. I havent installed mine yet but they seem like they are actually decent quality even with the cheap price tag.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
the company that makes those contacted us back before SEMA, they are "ok" for the money but will not work on corvettes with the alternator in the stock location and will not work on f-bodies with a/c.
We mocked them up to a friends engine today that was on a stand, and they work well with the truck plug wires. We did discover that they will probably not work unless you are running aftermarket fuel rails that move the stock fuel line to rail conection. IMO its still worth the little bit of extra work getting them to fit. Im sure the Nasty Performance covers are better quality, but they also cost quite a bit more.
TECH Fanatic
Joined: Sep 2005
Posts: 1,584
Likes: 23
From: NYC
http://www.nastyperformance.com/Valvecovers.html We are a sponsor on here and have been making our covers for over 10 years. They fit all cars and trucks.
LS1Tech Sponsor
Joined: Feb 2006
Posts: 1,170
Likes: 1
From: Rockfield Kentucky
http://www.nastyperformance.com/Valvecovers.html We are a sponsor on here and have been making our covers for over 10 years. They fit all cars and trucks.
Robin
Stay away from the ebay ones.
The pedestals that the bolts go through are not all centered. I had a horrible oil leak on the back out of the drivers side one.
Also, like was posted earlier, when you install the coil brackets and coils they hit the AC on the F-body cars, also I had to bend my fuel rail line to make it work.
I just went back to stock...
The pedestals that the bolts go through are not all centered. I had a horrible oil leak on the back out of the drivers side one.
Also, like was posted earlier, when you install the coil brackets and coils they hit the AC on the F-body cars, also I had to bend my fuel rail line to make it work.
I just went back to stock...