Does anyone have any experience w/ this intake elbow?
12-13-2010, 11:13 AM
#1
Does anyone have any experience w/ this intake elbow? I am interested because the design of this elbow has more volume and the bend is not as drastic as the ebelbrock low profile design. Not only that but it can be built with a 102mm TB opening! I would REALLY REALLY like to run a vic jr with my build but I know the FAST 102 is good too but im just getting info, and I would appreciate it. This is my build for my quest to 550hp RWHP minimum.
So far I have a:
SDPC 416 Ls3 stroker
LPE cnc'd, ported and milled Ls3 heads to 11.9 to 1
Comp cam spec'd 247/259 on a 113 with .624 lift on both sides on LsL lobes.
Im debating with either a FAST 102 or a Vic Jr (ported) with a good elbow (dont wanna cut my car).
will be shifting at7200 rpm
I will be using either 1 7/8 or 2in headers or a combination of both (stepped)
Here are the pictures of both elbows:
So far I have a:
SDPC 416 Ls3 stroker
LPE cnc'd, ported and milled Ls3 heads to 11.9 to 1
Comp cam spec'd 247/259 on a 113 with .624 lift on both sides on LsL lobes.
Im debating with either a FAST 102 or a Vic Jr (ported) with a good elbow (dont wanna cut my car).
will be shifting at7200 rpm
I will be using either 1 7/8 or 2in headers or a combination of both (stepped)
Here are the pictures of both elbows:
Last edited by litle88; 12-15-2010 at 11:33 AM.
