06killerv

iTrader: (2)

so I have a 408 build with ported L92's in a TBSS I was curious what is the best intake to use. stock ported l92 intake. holley hi-ram or a vic jr with an elbow? also should I go to a nw 102 also. I know for boosted applications the vic jr and the holley hi-ram work well but I don't know about NA

armyboyatc

iTrader: (29)

The single plane intake will lose power down low but pick it up in the upper RPM's. In my experience and opinion, that intake really needs a custom cam to make it shine like it was intended. If it were my car I'd put a FAST 102 and make more midrange power and nice peak numbers. You might get your cam specs and call Martin at tick and he would be able to tell you how your cam will work with a single plane and what would be the best all around intake for you.

Gray86hatch

iTrader: (83)

Mast with the proper cam is where it is at.

Tim

Sales@Tick

iTrader: (3)

Mast intake and a custom cam.

Tim is right on.

I can make just as much power as a Fast intake above 4000rpm with a single plane with the proper cam events.

Possibly even lower.