HELP NEEDED LS7 - LS3 Oiltemp sensor
Thread Starter
Registered User
Joined: Jul 2015
Posts: 3
Likes: 0
HELP NEEDED LS7 - LS3 Oiltemp sensor I build a LS3 in my 2007 Z06 and used the LS7 wiring. Everything works but i need to put my 2 wires for my oiltemp that normally was in the drysump on the LS7, to my 3-pin oilsensor/levelsensor on my LS3 oilpan.
What wires goes to what?
What wires goes to what?
The green/white wire goes to the "B" terminal of the 3 way connector and the other wire goes to the "C" terminal.
The "A" terminal would go to the ECM (C2 33) for the oil level signal if you were wanting to hook it up..
The "A" terminal would go to the ECM (C2 33) for the oil level signal if you were wanting to hook it up..
Engine oil temp/level signal LS3 
