ls3 into a 97 Vette
Thread Starter
Teching In
Joined: Feb 2016
Posts: 34
Likes: 1
From: APACHE JUNCTION, AZ
what a ummy I am Hi to all
After racking my so called brain out and talking to several different tech people, with no answers I discovered that somewhere along the line someone installed a incorrect fuel pump
into the Vette. It does not have the hole to feed the fuel line through the cap. I have ordered the correct pump which will solve my problem.
I have my Dunce cap on
Mike
After racking my so called brain out and talking to several different tech people, with no answers I discovered that somewhere along the line someone installed a incorrect fuel pump
into the Vette. It does not have the hole to feed the fuel line through the cap. I have ordered the correct pump which will solve my problem.
I have my Dunce cap on
Mike
TECH Senior Member
Joined: Jun 2016
Posts: 22,289
Likes: 3,615
From: Central Cal.
Hi to all
After racking my so called brain out and talking to several different tech people, with no answers I discovered that somewhere along the line someone installed a incorrect fuel pump
into the Vette. It does not have the hole to feed the fuel line through the cap. I have ordered the correct pump which will solve my problem.
I have my Dunce cap on
Mike
After racking my so called brain out and talking to several different tech people, with no answers I discovered that somewhere along the line someone installed a incorrect fuel pump
into the Vette. It does not have the hole to feed the fuel line through the cap. I have ordered the correct pump which will solve my problem.
I have my Dunce cap on
Mike
Thread Starter
Teching In
Joined: Feb 2016
Posts: 34
Likes: 1
From: APACHE JUNCTION, AZ
Hi
Well the LS3 is now installed and running with major help from a friend. We are running a 411 ecm and have everything correctly
EXCEPT the A/C. It just will not come on. I remember reading about a ground to the back of the engine, however, I can't find the post. Can anyone please give me some help with this problem.
Sent the 97 to the Dyno shop for a mild tune, we got 418 hp to the rear wheels, I didn't think that was to bad for an almost stock LS3.
Thanks fpr all the help in getting this project completed
Mike
Well the LS3 is now installed and running with major help from a friend. We are running a 411 ecm and have everything correctly
EXCEPT the A/C. It just will not come on. I remember reading about a ground to the back of the engine, however, I can't find the post. Can anyone please give me some help with this problem.
Sent the 97 to the Dyno shop for a mild tune, we got 418 hp to the rear wheels, I didn't think that was to bad for an almost stock LS3.
Thanks fpr all the help in getting this project completed
Mike
On an f-body I don't remember anything about a ground but I think there was an issue related to a vacuum line on the back of the intake. I had problems w/ fuses blowing so I don't know if my a/c is working but my top vents don't. I don't think I connected my vacuum line from the a/c.
