4l60e to 6.0
Thread Starter
Teching In
Joined: Oct 2017
Posts: 38
Likes: 0
From: Bartlesville, Ok
4l60e to 6.0 I have been doing some reading on this swap, but I still not sure if this will even work or if I should give up.
I have a 2004 4L60E that I want to mate with my L96. I am struggling to find parts that will make this work. I know the electrical issue is the big one so I am going to get a Holley Terminator X kit to solve that issue, but what about the physical connection? Do I need a different flexplate or torque converter? What about shift linkage?
I have a 2004 4L60E that I want to mate with my L96. I am struggling to find parts that will make this work. I know the electrical issue is the big one so I am going to get a Holley Terminator X kit to solve that issue, but what about the physical connection? Do I need a different flexplate or torque converter? What about shift linkage?
TECH Fanatic
Joined: Dec 2017
Posts: 1,463
Likes: 265
From: Bossier City, Louisiana
Shift linkage is easy. Lokar makes a universal shift linkage for a column shift or a console shift. Some bending of the shift rod is required to get around the firewall for my column shift so don't cut off too much all at once - cut only a little at a time. Measure many, cut only a few times. Climb under and out from your vehicle . . . . many times.
The ATSG guide series of documents dedicated to the 4L60E can answer your other questions with certainty.
Rick
The ATSG guide series of documents dedicated to the 4L60E can answer your other questions with certainty.
Rick
