View Poll Results: what is the best forged 4" crank
lunati
26
33.33%
eagle
7
8.97%
callies
36
46.15%
other
9
11.54%
Voters: 78. You may not vote on this poll
what is the best forged crank
#7
LS1Tech Sponsor
Join Date: Feb 2006
Location: Rockfield Kentucky
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
Weight is not a huge factor for us. We need stength. The Lunati is a little heavier in all the right places.
We looked at the Callies next to the Lunati and went with the Lunati.
We could not get some of the options that we wanted on the Eagle.
I have an LS3 with a TVS 2300 that will get a stock stroke Lunati forged crank very soon.
Robin
We looked at the Callies next to the Lunati and went with the Lunati.
We could not get some of the options that we wanted on the Eagle.
I have an LS3 with a TVS 2300 that will get a stock stroke Lunati forged crank very soon.
Robin
Trending Topics
#8
TECH Enthusiast
iTrader: (15)
Join Date: Aug 2006
Location: Central PA
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
No reason to ever go with Eagle. Especially if you have a manual. They have yet to resolve the issue with the piolt bearing not fitting tight enough.
Compstar is THE budget crank.
Compstar is THE budget crank.
#13
Banned
iTrader: (2)
I'm just curious if anyone actually knows about ANY kind of cranks breaking. Seems to be a seriously rare event, no matter which type of crank is used.
Last edited by LS6427; 12-05-2008 at 08:49 PM.
#14
TECH Enthusiast
iTrader: (15)
Join Date: Aug 2006
Location: Central PA
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Its ALL about the crank breaking, thats the only reason people buy forged cranks for big power builds. No matter how well a stock crank is built or how well the builder preps it and installs it, it will snap like a toothpick with too much power/torque.
I'm just curious if anyone actually knows about ANY kind of cranks breaking. Seems to be a seriously rare event, no matter which type of crank is used.
I'm just curious if anyone actually knows about ANY kind of cranks breaking. Seems to be a seriously rare event, no matter which type of crank is used.
#17
There's a huge difference in running a assembly at 10k rpm @550hp then running a assembly 7K @1,500+hp...
#18
FormerVendor
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
While the stock GM crank is strong, and can handle it's fair share of a beating, and is NOT the weak link on a stock bottom end, if you do become a real "player" and start making some power, you will break the stock crank eventually. A Forged steel crank is stronger. Most people that plan on high 10's, can get by on the stock crank, no question. And YES, I do know that alot of people are running quicker ET's with the stock crank. All I am saying is, WHY? When you start making serious power, and sstart running low 10's and quicker, why would you risk it? Has anyone seen what a broke crank will do to your motor? I have. It's not pretty, it CAN take out your whole motor. Block, rods, pistons, cam, water pump (yes, the water pump). I had a crank come apart on me, and did just that. It also took out my oil pan, and STARTER. Yep, when the crank let go, ripped a rod apart and slung the rod through the block and knocked the starter clean off. Broke the mounting lugs. When it spilt the block, it seperated my water pump in half as well. Now, I am NOT saying that can't happen with a Forged crank either. I am saying again, that the Forged crank (and just quality parts in general)gives you better insurance again Carnage like that. Winberg, Scat, Lunati all make killer cranks by the way.
I went with Eagle in my motor, as it was the cheapest Forged crank, and I used an Eagle in my Ford, and I beat it with 1000HP for a couple seasons with good luck.
I went with Eagle in my motor, as it was the cheapest Forged crank, and I used an Eagle in my Ford, and I beat it with 1000HP for a couple seasons with good luck.
Last edited by Gen414; 12-06-2008 at 10:25 AM. Reason: added
#20
Banned
iTrader: (2)
Boosted 346's are limited to their power/torque output because of the stock crank. I know a couple people that went forged pistons and forged rods with sc'ers and turbos, they are limited by what the stock "cast" crank can handle. Otherwise they would turn up the boost and make 1,200 hp. instead of 700 hp.