Cam Lobe Specifications Compilation
Thread Starter
TECH Addict
iTrader: (11)
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
Cam Lobe Specifications Compilation Cross posted from the Gen III internal engine section:
I've gathered all of the cam lobe data I can find for the LSx engine platform into a single document. Currently, these only include lobes from Comp Cams, Crane Cams, Lunati Cams, Cam Motion and Isky Racing Cams. I figured someone else could use the data so here it is.
Lobes included in the attached document:
Lunati Cams
Comp Cams
Crane Cams
Isky Racing Cams
Cam Motion
Any and all feedback welcome. If anyone has Crower lobe data I would appreciate it.
I've gathered all of the cam lobe data I can find for the LSx engine platform into a single document. Currently, these only include lobes from Comp Cams, Crane Cams, Lunati Cams, Cam Motion and Isky Racing Cams. I figured someone else could use the data so here it is.
Lobes included in the attached document:
Lunati Cams
- Baseline Series
- Baseline Lobe Family
- CNC Low Lift Series
- CNC High Lift Series
- .328 and .353 Lift Series
- LS Voodoo Series
Comp Cams
- Xtreme RPM Low Lift
- Xtreme RPM High Lift
- Xtreme Energy XE-R
- XFI Intake
- XFI Exhaust
- Thumpr Intake
- Thumpr Exhaust
- Xtreme Energy LSL
- Xtreme Energy LSK
- Xtreme Marine
- Xtreme Marine High Lift
- Cheater HR
- RP
- SP
- Xtreme Tri-Power
- Unknown category
Crane Cams
- HR1
- HR2
- HR3
- HR4
- HR5
- LSHS
- HIR
- HR400
Isky Racing Cams
- HRX Series
- High Performance Series
Cam Motion
- Hydraulic Roller Lobes
Any and all feedback welcome. If anyone has Crower lobe data I would appreciate it.
Last edited by 405HP_Z06; Apr 12, 2009 at 10:42 PM.
Nice work. Lots of lobes in there. There are a good number of Comp lobes that work well with the LSX platform that have been left off (like the Xtreme Marine High Lift Lobes, some of the Cheater HR lobes, the XE High Lift lobes between 256-270 at .050", and the hydraulic-compatible solid roller lobes). I'm sure you will have lots of updates from shops too.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
Thread Starter
TECH Addict
iTrader: (11)
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
Nice work. Lots of lobes in there. There are a good number of Comp lobes that work well with the LSX platform that have been left off (like the Xtreme Marine High Lift Lobes, some of the Cheater HR lobes, the XE High Lift lobes between 256-270 at .050", and the hydraulic-compatible solid roller lobes). I'm sure you will have lots of updates from shops too.
Thread Starter
TECH Addict
iTrader: (11)
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
Updated document with input from Patrick G , JPH , and Matt @ TSP . Thanks for the valuable input.
See first post, document is now attached instead of the external download link.
See first post, document is now attached instead of the external download link.
Thread Starter
TECH Addict
iTrader: (11)
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
TECH Addict
iTrader: (11)
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
Updated lobe list posted. I added various lobes in many Comp Cams families plus
and added specs on existing lobes that was previously missing.
Enjoy.
- Thumpr Intake
- Thumpr Exhaust
- Xtreme Marine
and added specs on existing lobes that was previously missing.
Enjoy.
Thread Starter
TECH Addict
iTrader: (11)
Joined: Jun 2003
Posts: 2,215
Likes: 19
From: Arlington, Tx
