ls2 to ls3?
Thread Starter
Teching In
Joined: Feb 2009
Posts: 16
Likes: 0
ls2 to ls3? So i cracked the LS2 block on my GTO. Plan is to put an Ls3 block in there.
Besides the pistons should everything just be a direct swap? Im thinking i only need to buy new pistons and the bare block? crank, rods, cam, water pump, oil pump, exc should move right over?
not sure if I will have any issue using a crank with a 24x reluctor wheel. I'm moving the ls2 cps to the ls3 block.
going to run it w/ 317 heads also. not changing the heads and intake.
Besides the pistons should everything just be a direct swap? Im thinking i only need to buy new pistons and the bare block? crank, rods, cam, water pump, oil pump, exc should move right over?
not sure if I will have any issue using a crank with a 24x reluctor wheel. I'm moving the ls2 cps to the ls3 block.
going to run it w/ 317 heads also. not changing the heads and intake.
Last edited by tomhGTO; Mar 20, 2009 at 08:02 PM.
TECH Resident
Joined: Apr 2008
Posts: 838
Likes: 12
From: Right here, right now!
So i cracked the LS2 block on my GTO. Plan is to put an Ls3 block in there.
Besides the pistons should everything just be a direct swap? Im thinking i only need to buy new pistons and the bare block? crank, rods, cam, water pump, oil pump, exc should move right over?
not sure if I will have any issue using a crank with a 24x reluctor wheel. I'm moving the ls2 cps to the ls3 block.
going to run it w/ 317 heads also. not changing the heads and intake.
Besides the pistons should everything just be a direct swap? Im thinking i only need to buy new pistons and the bare block? crank, rods, cam, water pump, oil pump, exc should move right over?
not sure if I will have any issue using a crank with a 24x reluctor wheel. I'm moving the ls2 cps to the ls3 block.
going to run it w/ 317 heads also. not changing the heads and intake.
Everything should swap over perfectly. I'd probably change over the rod and main bolts to ARP and the head bolts too if they weren't already ARP.
The CPS will fit in the same spot whether or not it's black(24x) or grey(58x). Since you have a 24x car you'll want to swap it over for sure, as well as the 2x cam sensor and cam gear.
One more thing: for a GTO, you'll have to plug the dipstick hole in the block, too.
The CPS will fit in the same spot whether or not it's black(24x) or grey(58x). Since you have a 24x car you'll want to swap it over for sure, as well as the 2x cam sensor and cam gear.
One more thing: for a GTO, you'll have to plug the dipstick hole in the block, too.
Thread Starter
Teching In
Joined: Feb 2009
Posts: 16
Likes: 0
TECH Resident
Joined: Apr 2008
Posts: 838
Likes: 12
From: Right here, right now!
Everything should swap over perfectly. I'd probably change over the rod and main bolts to ARP and the head bolts too if they weren't already ARP.
The CPS will fit in the same spot whether or not it's black(24x) or grey(58x). Since you have a 24x car you'll want to swap it over for sure, as well as the 2x cam sensor and cam gear.
One more thing: for a GTO, you'll have to plug the dipstick hole in the block, too.
The CPS will fit in the same spot whether or not it's black(24x) or grey(58x). Since you have a 24x car you'll want to swap it over for sure, as well as the 2x cam sensor and cam gear.
One more thing: for a GTO, you'll have to plug the dipstick hole in the block, too.
