SLOC5LS6

Why didn't you like the Torquer LS7 cam?

3fingas

iTrader: (16)

Torquer LS7 is a nice stick. I have it in a LS3 with 1.8s and behives. Makes powa thru 7300.

Dutchman427

iTrader: (1)

Dominator 2 cam here.

lt1773

iTrader: (1)

Any more result?

yonerhottlt1

iTrader: (21)

FYI, I have a QM600 cam for sale with only 500 miles on it for $200 plus shipping...

nobreaks254

iTrader: (50)

I dont have any results yet as Im still finishing my car, but I am running a custom cam specd by Richard at WCCH who did my Brodix LS7 heads. The cam is 235/243 on a 112+4 with .661/.653 lift.

ramairws6

iTrader: (33)

Sorry but that cam isn't worth $2 imo. There are much better cams then that thing out there for these things and that QM600 is a mutt on the bottom end and horrible to tune for even a good tuner. Ask me how i know....

DaleTx

247/255 @ 0.050 112 LSA, 566 peak torque @ 5500 RPM, 672 peak Hp @6900 RPM (at crank). 11.5:1 compression, 427 CI, LS7 heads, GM single plane intake, port fuel injected, NA. Got good results with this cam and the LS7 heads. The engine is not installed in the car yet. Idled fine on the engine dyno at 1000 RPM. The same cam in a 427 with ported L92 heads and LS intake made 583 peak torque @ 4800 RPM and 616 peak Hp at 5900 RPM.

sandragnx

iTrader: (82)

What do you think of Ragin Racin Leathal or Punisher?

CAMAROZ28AQUINO

I run Ragin Racin Lethal cam and love it. Runs awesome, tune is bang on no surging or bucking. Sounds nasty at idle and pulls hard to redline.

djfury05

iTrader: (30)

I have the Ragin Racin Punisher cam.. seems pretty good. Guy I bought the engine/trans combo from ran 10.34 at 138.xx mph NA with it in a 98 Camaro 3450 raceweight 93 octane and thru a 6 speed.

ramairws6

iTrader: (33)

Little tame for my blood but great cams if you want midrange grunt and still have good driveability. Now the Striker series of cams is where it's at!!