Wanting to convert DOD lifters in LS4 to Non DOD lifters
#1
12 Second Club
Thread Starter
iTrader: (11)
Join Date: Feb 2009
Location: Plainfield, IN
Posts: 570
Likes: 0
Received 0 Likes
on
0 Posts
Wanting to convert DOD lifters in LS4 to Non DOD lifters
Can someone give me a little insight on this and maybe their experiences or "how to" with my motor....the thing is, this is an LS short block just mounted transversely...FWD Ive see where some just switch to the LS2 vallley covers and different trays etc....but Im not real sure if this applys to me...I know that my oil pump is the high capacity...which im sure you guys know about...its the 30% higer flowing pump for the DOD to load the lifters...which i have been told is too much for the conversion lifters....so would have to downgrade the oil pump etc....
So someone give me some insight if at all possible....i was told that its as easy as just dropping some LS1,2,6 high energy lifters in and turning the DOD off in the tune...??
Thanks in advance!!
Ross
So someone give me some insight if at all possible....i was told that its as easy as just dropping some LS1,2,6 high energy lifters in and turning the DOD off in the tune...??
Thanks in advance!!
Ross
#3