Hot Rod tested 8 ported LS3/L92 heads!
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Did anyone see the article in Hot Rod where they tested 6 different ported OEM heads, a Pro Comp head and a Mast head?
In the test was OEM ported heads by LPE, WCCH, SDPC, TEA, Pro Comp, GMPP. There were also aftermarket castings by Pro Comp and Mast.
All tested on a 466 with a PI carb intake, pump gas, hyd roller cam, peak power was 762 hp, the Mast heads were the hands down winner, but also have 12 degree valve angles and 1.8 rockers, as opposed to 15 degree with 1.7 rockers.
It's a good read, check it out.
In the test was OEM ported heads by LPE, WCCH, SDPC, TEA, Pro Comp, GMPP. There were also aftermarket castings by Pro Comp and Mast.
All tested on a 466 with a PI carb intake, pump gas, hyd roller cam, peak power was 762 hp, the Mast heads were the hands down winner, but also have 12 degree valve angles and 1.8 rockers, as opposed to 15 degree with 1.7 rockers.
It's a good read, check it out.
#4
10 Second Club
iTrader: (199)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes its the FEB 2011 issue. On a side note it was a 468 ci w/12.2 to 1 comp and a comp cam >> 255/271 deg with .624 lift on 115 lsa .It also made 732 with a /FAST 102 intake .
The article also showed where the factory balancer came apart while they where testing at 7,000 rpm.
The article also showed where the factory balancer came apart while they where testing at 7,000 rpm.
#7
TECH Regular
iTrader: (35)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I found the first comparison to be a bust. With the 408 restricted by the fast there was very little difference in horsepower among the various submisions. The highest performing heads were the couple that had a slightly smaller combustion chamber. However, this go-round HRM upped the ante and tested the heads with a single plane intake. They essentially removed the restricter plate from the motor. This allowed the aftermarket heads to shine over the ported castings. It would have been interesting to have seen how the cathederal heads performed with a supervictor. Likewise, I would guess that the ported LS3's would have performed closer to the Mast heads had they all been tested with the Fast 102 this time.
Last edited by ramairroughneck; 12-11-2010 at 11:49 AM.
Trending Topics
#10
#11
Tin Foil Hat Wearin' Fool
iTrader: (36)
Join Date: Oct 2004
Location: Austin, TX
Posts: 23,027
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As long as Richards heads arent way behind comparable heads Ill always use WCCH for my ported head needs. He has treated me great every time Ive bought something from him, and taken all the time I needed to answer any questions Ive had. Best customer service Ive ever had the pleasure of dealing with.
#14
9 Second Club
iTrader: (33)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As long as Richards heads arent way behind comparable heads Ill always use WCCH for my ported head needs. He has treated me great every time Ive bought something from him, and taken all the time I needed to answer any questions Ive had. Best customer service Ive ever had the pleasure of dealing with.
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#17
LS1Tech Premium Sponsor
iTrader: (4)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sorry guys we were trying to get the new prc aftermarket casting head there and didn't make it.
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#19