ERL Superdeck II Build
#21
I understand they Are heavy in comparison but you also said it was 4400lbs and there is just no way if it's a NA build with an aluminum block on 18inch wheels. Especially if your average size and weight.
#22
Teching In
Thread Starter
Join Date: Apr 2013
Location: Houston
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
That was a swag as I haven't had it corner balanced since making so many changes.
Since you can't see much of these after installation, here are some pics of the 5 stage pump and oil pan from Dailey Engineering.
Since you can't see much of these after installation, here are some pics of the 5 stage pump and oil pan from Dailey Engineering.
#23
Teching In
Thread Starter
Join Date: Apr 2013
Location: Houston
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Between finding shop availability and gathering up hoses and fittings, we finally got the dry sump installed. We elected to go with a tall Z06 style tank. Since this is an a/c delete, we cut a hole in the wheel well and put it where some of the HVAC stuff was in the back left of the engine bay. We also had to cut a bit off the side of the tank for wheel clearance but it still looked good.Here are some pics. If I had to do over again, I would probably just put the tank in the trunk and all those long lines would act as my oil cooler.
The pump sits where the a/c compressor used to sit.
The pump sits where the a/c compressor used to sit.
#24
TECH Fanatic
Join Date: Aug 2009
Location: Coast of San Mateo County Between Pacifica & HMB
Posts: 1,820
Received 220 Likes
on
131 Posts
Cam Specs
Momentum,
How are you enjoying your ride?! Haven't seen a post in quite
A while. I was hoping you would share your cam specs
From your 603/599 build presuming you haven't changed it
In the last 1 1/2 + Years, also did the Dry Sump have any
Effect on the power numbers.
Thanks
How are you enjoying your ride?! Haven't seen a post in quite
A while. I was hoping you would share your cam specs
From your 603/599 build presuming you haven't changed it
In the last 1 1/2 + Years, also did the Dry Sump have any
Effect on the power numbers.
Thanks
#26
TECH Enthusiast
iTrader: (14)
[moh-ter]
Spell Syllables
Examples Word Origin
See more synonyms on Thesaurus.com
noun
1.
a comparatively small and powerful engine, especially an internal-combustion engine in an automobile, motorboat, or the like.
2.
any self-powered vehicle.
3.
a person or thing that imparts motion, especially a contrivance, as a steam engine, that receives and modifies energy from some natural source in order to utilize it in driving machinery.
4.
Also called electric motor. Electricity. a machine that converts electrical energy into mechanical energy, as an induction motor.
#28
TECH Senior Member
He's sounding a lot like Lance at PanteraEFI... lol
(he just got on someone for the same exact reason..)
(he just got on someone for the same exact reason..)
#29
And yet we call it Motorsports....
__________________
http://www.trickflow.com/emain.asp
Click Above for Product Information
Click Above for Product Information
#30
TECH Senior Member