cam sensor wiring
Thread Starter
Teching In
Joined: Sep 2017
Posts: 32
Likes: 0
cam sensor wiring I'm looking for so help on wiring up the Gen 1V cam sensor to a megasquirt MS3 Ultimate, I understand that the sensor needs a 5v supply which i can connect to one of the VREF 5V + outputs from the ECU and then connect the CMK + and a sensor return. The problem I have is with the connector pin designation, I can't seem to find any information on the connector I have, looking into the 3 pin pigtail connector with the locking tab up I have right to left A terminal red wire, B in the middle pink and black wire and C brown and white wire. Can you tell me which wire goes to where, or in idiot speak how I can test sensor to find out.
I'm thinking
A terminal red wire 5V+ in
B terminal pink and black sensor return -
C terminal brown and white ECU to sensor +
Never done this before so bear with me and the engine hasn't been run before just finished building it.
Regards Tim
I'm thinking
A terminal red wire 5V+ in
B terminal pink and black sensor return -
C terminal brown and white ECU to sensor +
Never done this before so bear with me and the engine hasn't been run before just finished building it.
Regards Tim
