new cam timing chain question
Thread Starter
Joined: Feb 2016
Posts: 26
Likes: 1
From: I live in Jacksonville Florida
new cam timing chain question I'm going to aftermarket cam in my 5.3 with 3 bolts holding gear on cam. I currently have a one bolt cam. What can I do for new gear that my cam sensor (in the timing cover) can read.
58x Timing Set Hi Sal, I too provide a Timing Set for the 58x decode.
The gears are billet steel, heat treated.
The Single Chain is the strongest made for the LS engine AND has "pin" oil holes.
The Lower Sprocket has the ability to allow correct Camshaft Timing.
Lance
The gears are billet steel, heat treated.
The Single Chain is the strongest made for the LS engine AND has "pin" oil holes.
The Lower Sprocket has the ability to allow correct Camshaft Timing.
Lance
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Joined: Feb 2016
Posts: 26
Likes: 1
From: I live in Jacksonville Florida
Timing chain Do I still a line top gear at 6 o clock and bottom gear at 12 o clock. And do these gears have any factory advances built in them or do I have not to worry about it.
