LS2 Inake manifold
TECH Regular
Joined: Nov 2001
Posts: 470
Likes: 0
From: Plano, Tx.
Originally Posted by Ryan23silverado
A different manifold is on the concept GTO with a modified LS2. So what is this?...
https://ls1tech.com/forums/showthrea...ght=LS7+Intake
Originally Posted by Ryan23silverado
no spy pics with your cell phone or anything 02RedHawk?
they were at least three valve heads, right?
they were at least three valve heads, right?
Boy, I wish for spy pics! Its pretty tight around the actual vehicles to get good looks; even was tough for me to snoop under the hood. Only had a chance to see the heads #'s and intake; the motor is B-I-G. There are some really cool exhaust tricks to boot.
C6 Z06 has some exterior changes too, it is very distintive over a base C6.
Last edited by 02RedHawk; Sep 3, 2004 at 10:17 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Veteran
Joined: Feb 2002
Posts: 4,049
Likes: 2
From: Loganville, GA
Originally Posted by Bryan Wilkinson
I contacted the dealer today, this is what I was told
Part no 12552137 C6 Manifold List 758.80 My cost 568.80
Part No 17113249 C6 Fuel Rail List 419.83 My Cost 314.88
Part No 17095239 C6 90mm Throttle Body List 548.91 My Cost 384.24
Hope this helps.
You also do not need to have a C6 to buy these parts, anyone off the street can buy them.
Part no 12552137 C6 Manifold List 758.80 My cost 568.80
Part No 17113249 C6 Fuel Rail List 419.83 My Cost 314.88
Part No 17095239 C6 90mm Throttle Body List 548.91 My Cost 384.24
Hope this helps.
You also do not need to have a C6 to buy these parts, anyone off the street can buy them.
the 12552137 came up as a gasket i think. My warehouse showed 1500 of them.
Last edited by BLKWS6; Sep 7, 2004 at 09:42 AM.
Originally Posted by BLKWS6
89017648 is the right part#. trust me 
TECH Veteran
Joined: Feb 2002
Posts: 4,049
Likes: 2
From: Loganville, GA
Originally Posted by Bryan Wilkinson
I find it very hard to believe that GMPARTSDIRECT is selling the LS2 Manifold for $360 less than what the dealership is selling it for. My guess is that they don't have an exact price. I have found in the past that GMPARTDIRECT is not that big of a savings.
although it didnt come from them....but same price
Originally Posted by BLKWS6
My credit card/receipt and the Intake sitting on my desk begs to differ.... although it didnt come from them....but same price
although it didnt come from them....but same price I am curious being that you now have it, all of the stuff that has been said about the build quality not being there would you agree or disagree, Do the inside of the port align up properly.
Thanks
Bryan
New Question
Originally Posted by BLKWS6
My credit card/receipt and the Intake sitting on my desk begs to differ.... although it didnt come from them....but same price
although it didnt come from them....but same price Thanks
I have 12570616 (mitsubishi made) and 12573190 (Delphi Made, currently not available)
TECH Veteran
Joined: Feb 2002
Posts: 4,049
Likes: 2
From: Loganville, GA
Originally Posted by Bryan Wilkinson
I stand corrected, the reason that our prices differ is because our part number differs. You do indeed have the right part number. The dealer gave me the wrong part number.
I am curious being that you now have it, all of the stuff that has been said about the build quality not being there would you agree or disagree, Do the inside of the port align up properly.
Thanks
Bryan
I am curious being that you now have it, all of the stuff that has been said about the build quality not being there would you agree or disagree, Do the inside of the port align up properly.
Thanks
Bryan