sroka

iTrader: (12)

Who here has run the cam motion link bar lifters Number:LS032111201 ????
how are they in comparison to LS7 or Johnsons?

Thanks

Floorman279

iTrader: (11)

cam motion and johnson will be similar depending on which lifter......for years LS7 was the "its ok, she will run a long time" lifter of cam swaps but thanks to ls1tech people are slowly realizing you are better off dropping a $400 lifter instead.

rednari2

iTrader: (1)

I have not used the Cam Motion link bars. I use the Morel 5290, street lifter. But, I do know they are Johnson's. How do I know, I called them and asked them.

Jimbo1367

Crane is suppose to have a good lifter. Anything but LS7s lifters from what I read here.

grinder11

iTrader: (1)

I'm running a Futral .610 lift, 232° duration, 112° LSA cam with LS7 lifters on 180lb base circle, 420lb over the nose PAC springs for 25,000 miles. Never had a bad lifter....... Yet!!!

sroka

iTrader: (12)

so the cam motion link bars are unbranded Johnsons???

Jimbo1367

I thought I read somewhere that Crane lifter supple CM. Prolly internet hype

sroka

iTrader: (12)

Well I recieved the cam motion lifters last night and they say morel on the crossbar.

99T/ATIME

iTrader: (3)

I recently bought these. Bobby from Cam Motion told me they are Johnson 2116's. They say Johnson right on them.

https://cammotion.com/lifters/ls-pre...tie-bar-style/

sroka

iTrader: (12)

Maybe since there was a lifter shortage cam motion was using whoever's they could get???
mine definitely said morel on the link bar.

99T/ATIME

iTrader: (3)

Very well could be the case. We ordered a set of sold lifters a few months ago for another 440 build and they were Cranes.

rednari2

iTrader: (1)

I think you guys are getting a little confused. The $400 link bars are Morels. The $500 plus set are Johnsons. Both are quality lifters, with the lower priced Morels intended for street use. This is more than an RPM limit. The street versions have looser tolerances designed for street use such idling in traffic, and can accept dirt particles better than the more sensitive race lifters.

Jay Fisher

I just got a set of link bar lifters Johnson's shipped from Cam Motion.

Jay Fisher

2126lsr