Here we go, 450ci LSx, Mast 285cc LS7 heads...
The following users liked this post:
rkupon1 (10-16-2023)
10-16-2023, 07:22 PM
#82
I forgot all about this thread. I ve been grinding hard on this build. Its going really well. Norhin like my Nova troubles. Im down to just wiring it up and putting interior back together. I finished up the holley dominator harness install tonight.
The following 3 users liked this post by rkupon1:
10-16-2023, 07:27 PM
#84
Nice, and sweet shop, is that your shop?
The following users liked this post:
rkupon1 (10-16-2023)
The following 5 users liked this post by rkupon1:
ALL ULL C (10-18-2023), brutalzo6 (10-17-2023), C5_Pete (10-31-2023), cdubbzz (10-18-2023), DualQuadDave (10-21-2023)
The following 4 users liked this post by rkupon1:
10-16-2023, 07:54 PM
#88
Waitn on a couple things I orderd. I ll clean up n organize the wiring. I modified the harness so everything pretty much lands behind the intake mani. Thats where all my sensors are anyways. Gunna shorten some of em up. Will have better pics afterwards.
10-16-2023, 08:00 PM
#89
The big shop in the background is Farks Supercars in NJ. Great guys, ALL of the negative cliches go out the window with these guys. They are awesome. My car was there to get some punchlist stuff done before wiring. Had them fab up mounts for the holley dominator, trans cooler, oil cooler, set ride hieght, alignment, etc.
The following 3 users liked this post by rkupon1:
10-16-2023, 08:14 PM
#90
ModSquad
iTrader: (6)
Looking great Ryan. Keep at it, and you’ll be driving it before you know it.
The following 3 users liked this post by Che70velle:
The following users liked this post:
rkupon1 (10-17-2023)
10-18-2023, 09:02 PM
#92
Very nice. I dig the Holley top setup. Tempted to try it on my car to see if it picks up anything.
The following 2 users liked this post by jayyyw:
DualQuadDave (10-18-2023), rkupon1 (10-19-2023)
The following 2 users liked this post by rkupon1:
jayyyw (10-19-2023), Ryans99ls1 (10-19-2023)
10-19-2023, 07:34 PM
#94
The following users liked this post:
rkupon1 (10-19-2023)
The following users liked this post:
jayyyw (10-20-2023)
10-20-2023, 07:15 PM
#96
OP: do you have the part number for that lid, or did you buy the whole manifold already in that configuration?
The following users liked this post:
jayyyw (10-20-2023)
10-21-2023, 04:26 PM
#98
TECH Addict
iTrader: (1)
Nice looking car and motor. With a car and motor like that, you could leave the house 5 minutes before kickoff, pick up a six pack, and be home with the first brewski open in time for the kickoff!!!
The following 4 users liked this post by grinder11:
The following 5 users liked this post by rkupon1:
Che70velle (11-07-2023), jayyyw (11-08-2023), Project GatTagO (11-06-2023), Ryans99ls1 (11-07-2023), SlowTBSS (11-07-2023)
11-06-2023, 09:30 PM
#100
Huge thanks to some fellow members on here for some help. Especially like to give a shout out to Andrew B and Steve Q. These guys really helped walk me thru 4 solid wknds of wiring this entire car up. Cannot wait to let Andrew get after it tuning...he s got his work cut out for him. Its gunna be rowdy. Eric Roycroft delivered!
The following 4 users liked this post by rkupon1: