Mizfit's LS7 427!!! 607 rwhp!!!!
#41
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2003
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
The heads will work on an Ls2 block as far as power I can't say for sure becasue it is a small bore so you will be giving up some power due to that.
Cahill93Z28- Thank you. A lot has been going on since then. You will have to swing by so we can get your SS upgraded with some Mizfit stuff.
Cahill93Z28- Thank you. A lot has been going on since then. You will have to swing by so we can get your SS upgraded with some Mizfit stuff.
#42
TECH Fanatic
iTrader: (2)
Originally Posted by Mizfit MotorSports
The heads will work on an Ls2 block as far as power I can't say for sure becasue it is a small bore so you will be giving up some power due to that.
Cahill93Z28- Thank you. A lot has been going on since then. You will have to swing by so we can get your SS upgraded with some Mizfit stuff.
Cahill93Z28- Thank you. A lot has been going on since then. You will have to swing by so we can get your SS upgraded with some Mizfit stuff.
Mizfit MotorSports, what modifications you did to the LS1 camaro to fit the LS7 top end? wiring harness, intake manifold, throttle body cable, injectors, fuel rails....etc
thanks.
#43
TECH Addict
iTrader: (22)
Originally Posted by Mizfit MotorSports
The heads will work on an Ls2 block as far as power I can't say for sure becasue it is a small bore so you will be giving up some power due to that.
Cahill93Z28- Thank you. A lot has been going on since then. You will have to swing by so we can get your SS upgraded with some Mizfit stuff.
Cahill93Z28- Thank you. A lot has been going on since then. You will have to swing by so we can get your SS upgraded with some Mizfit stuff.
#46
TECH Fanatic
iTrader: (9)
Join Date: Feb 2002
Location: Morton IL
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 69firebird
yeah, you need a 4.125 for the heads, according to sdpc and other sources ive herd
Ed
Ed
#48
TECH Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like
on
1 Post
Anyone heard of Lou Gigliotti?? Just wondering, his personal C6 ZO6 with the G7X4 cam that he designed, and his long tube headers, with a tune put out 630+rwhp. No other mods, stock heads. Cam,LT headers,Tune and that's it. Lou is the man, he did my car. Kept her under 500 rwhp by using the G5X3 cam. LS1 stock bottom ends don't like anything that high.
#49
TECH Fanatic
iTrader: (9)
Join Date: Feb 2002
Location: Morton IL
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by allngn_c5
Anyone heard of Lou Gigliotti?? Just wondering, his personal C6 ZO6 with the G7X4 cam that he designed, and his long tube headers, with a tune put out 630+rwhp. No other mods, stock heads. Cam,LT headers,Tune and that's it. Lou is the man, he did my car. Kept her under 500 rwhp by using the G5X3 cam. LS1 stock bottom ends don't like anything that high.
Last edited by Greg Fell; 05-08-2006 at 10:01 AM.
#50
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2003
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
the heads should work on a 4.065 bore I will double check.
383- We are currently based out of Lawrence, Kansas but may be moving in the near future.
Greg- thank you for clearing some of that stuff up yes Lou's car put down some very impressive numbers but it is not exactly fair to compare an Ls7 crate motor in a z06 which has completely different drivetrain, rearend, wheels/tires, computer etc...
We are very happy with how well this Ls7 top end is and I think it shows in Lou's and our car. I am sorry we are still working on getting the graph up. We have been very busy lately and the scanner sucks, please be patient with us.
Abdullah- I will send you a pm of the various modifications needed to make this work in a f-body.
383- We are currently based out of Lawrence, Kansas but may be moving in the near future.
Greg- thank you for clearing some of that stuff up yes Lou's car put down some very impressive numbers but it is not exactly fair to compare an Ls7 crate motor in a z06 which has completely different drivetrain, rearend, wheels/tires, computer etc...
We are very happy with how well this Ls7 top end is and I think it shows in Lou's and our car. I am sorry we are still working on getting the graph up. We have been very busy lately and the scanner sucks, please be patient with us.
Abdullah- I will send you a pm of the various modifications needed to make this work in a f-body.
#51
hey taylor, you were so helpful on the phone when we were talking and youre a great guy. I advise everyone to do business with mizfit motorsports. I wish you the best of luck and at times i wish i went with your 427!
#52
12 Second Club
iTrader: (11)
Join Date: Jan 2005
Location: NC, Charlotte / SC, RockHill
Posts: 1,191
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1 Fine 69
hey taylor, you were so helpful on the phone when we were talking and youre a great guy. I advise everyone to do business with mizfit motorsports. I wish you the best of luck and at times i wish i went with your 427!
I wish u a good of a luck, and keep on the good work.
by the way guys, Taylor well be building me a big bore engine very soon using the L-92 and his sheetmetal intake. we well keep u posted guys for sure with results. Hopefully, at the mid of July the long block well be ready.
#53
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2003
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
1 fine 69 and Prostock- Thank you very much for the kind words. I do appreciate the posts.
1 fine 69- It would have been great to see the LS7 in that impecable 69 but you still got a great motor and I want to see some results and video clip of it.
Prostock- give me a call any time if you want to go over your package or whenever you want to get started.
Thanks again guys...
1 fine 69- It would have been great to see the LS7 in that impecable 69 but you still got a great motor and I want to see some results and video clip of it.
Prostock- give me a call any time if you want to go over your package or whenever you want to get started.
Thanks again guys...
#54
10 Second Club
iTrader: (14)
Join Date: Mar 2002
Location: Kansas City, KS
Posts: 2,893
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mizfit MotorSports
the heads should work on a 4.065 bore I will double check.
383- We are currently based out of Lawrence, Kansas but may be moving in the near future.
Greg- thank you for clearing some of that stuff up yes Lou's car put down some very impressive numbers but it is not exactly fair to compare an Ls7 crate motor in a z06 which has completely different drivetrain, rearend, wheels/tires, computer etc...
We are very happy with how well this Ls7 top end is and I think it shows in Lou's and our car. I am sorry we are still working on getting the graph up. We have been very busy lately and the scanner sucks, please be patient with us.
Abdullah- I will send you a pm of the various modifications needed to make this work in a f-body.
383- We are currently based out of Lawrence, Kansas but may be moving in the near future.
Greg- thank you for clearing some of that stuff up yes Lou's car put down some very impressive numbers but it is not exactly fair to compare an Ls7 crate motor in a z06 which has completely different drivetrain, rearend, wheels/tires, computer etc...
We are very happy with how well this Ls7 top end is and I think it shows in Lou's and our car. I am sorry we are still working on getting the graph up. We have been very busy lately and the scanner sucks, please be patient with us.
Abdullah- I will send you a pm of the various modifications needed to make this work in a f-body.
#55
I think the all aluminum block and heads with the 870 carb is a different set up than what a lot of peope are running. Most people go lsx or old school block. I decided it would be cool to combine them! I will definately get a video of it and more pictures. It should be done this weekend. Im taking off from school thursday and friday to finish it! haha. i cant wait to see some projects and engines from mizfit. good luck!
#56
TECH Regular
Thread Starter
iTrader: (11)
Join Date: Dec 2003
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
WOW done already you guys have been kicking *** on that thing... very impressive. Everyone on tech is going to remember your 69 once you get a clip or two. Good luck and thank you again.
383- Give us a call and if we don't answer it is because we are on the phone just leave a message and I will get back asap. Lookiing forward to talking with you.
383- Give us a call and if we don't answer it is because we are on the phone just leave a message and I will get back asap. Lookiing forward to talking with you.
#57
We got the motor 3 weeks ago and man i feel stupid not having it in by now. My dad had to remind me where we were 2 months ago....STOCK. Its good to hear that im not taking too long on th install. I thought it was never going to get on the road.
#58
Launching!
iTrader: (1)
Join Date: Feb 2004
Location: Minnesota
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
Nice numbers guys. I noticed you were using the UMI throttle body, I was just wondering what thoughts you had on it? Does it seem to be better than the other throttle bodies out there?
#60
TECH Addict
iTrader: (1)
Join Date: Aug 2002
Location: Lake Jackson,TX
Posts: 2,879
Likes: 0
Received 0 Likes
on
0 Posts
What intake set-up do you guys recommend for a set-up like mine. My ET heads are choked down with the LSX90mm intake set-up and it hurt my peak power pretty good. I love the power you guys got! I was hoping for more out of my new 408, but everything shows the intake set-up needs to be changed with these heads. Please let me know your thoughts, car in sig, Thanks!