FAST rails on LS2???
LS1 injectors will not fit an LS2 intake since the injector holes in the intake are larger than those in an LS1.. So to be clear.. are you looking to run and LS2 intake, LS1 injectors and FAST fuel rails?
Let me know
Let me know
Originally Posted by caindo
Yes, Ls2 intake, ls1 injectors, FAST rails. Pig tail adapters and ls1 o-rings is all, correct?
who sells the ls2 to ls1 adapters besides katech?
who sells the ls2 to ls1 adapters besides katech?
I wonder it there is any downside to running the thicker O-rings?
And yes, this would be the same on an LS7...
Thanks Steve. Car (05 gto) gets it's new inhaler (d1sc), new windpipe (blower cam), and new straw (full fuel system w/ return setup (walbro, bap, #60s, rails/reg/etc)) starting thursday. Dyno should be on saturday if all goes well. lookin for 6.
Trending Topics
Still confused here, caino said LS-1 o-rings are needed, but I have a feeling those are the wrong 0-rings, but Steve, you said they were the right ones? ****, i'll probably just go to the hardware store and find the right ones for 2 cents a piece haha.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo So, if you're using LS1-style injectors in a LS2 manifold, and the LS2 manifold has larger holes then the LS1 manifold, then how are the LS1-style o-rings going to work? Thats what I'm confused about.
Adrian
Adrian
Originally Posted by Haans249
So, if you're using LS1-style injectors in a LS2 manifold, and the LS2 manifold has larger holes then the LS1 manifold, then how are the LS1-style o-rings going to work? Thats what I'm confused about.
Adrian
Adrian
Using LS1 style o-rings in an LS2 intake would result in.. oh.. fire? lol
Maybe you could use a thicker O-ring on the LS1 injector? Also, using an LS1 injector will raise the fuel rail since the injectors are longer.. that means you need spacers as well..
I'm running a FAST intake with FAST fuel logs. I was going to run LS2 injectors but it got to be too big a PITA so I am switching to LS1 style. FAST is working on a kit to fix this but it isn't out yet.
Here's the kit from Katech..
http://www.katechengines.com/street_...tail.php?id=35
If you you use the Katech o-rings and cut the crossover tube on LS1 fuel rail then put in a short length of good hose to extend the crossover ~1" inch you can use a LS1 fuel rail and it fits perfect. I have a spare for cheap if you do not want to cut yours.
I had to use LS1 o-rings on my LS2 injectors in a FAST intake so I am assuming the reverse is true. Looked like the inner diameter of the o-rings were the same... one was just thicker.
Incidentally, Ford 4.6 injector lower o-rings will work in the LS1 manifolds.
Incidentally, Ford 4.6 injector lower o-rings will work in the LS1 manifolds.
