Katech Value 427 dyno test - 3 cams
#41
TECH Regular
Join Date: Mar 2006
Location: Rolesville, NC
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Katech
Specs:
Katech value 427 short block 11:1CR. -> https://ls1tech.com/forums/generation-iv-internal-engine/548511-katech-value-427-short-blocks.html
Katech Stage 3 LS6 heads w/ 2.100 intake valves
LS6 intake manifold
Donaldson blackwing airbox
MEFI controller
Dyno headers
Test 2: (C4-3481 - blue) Katech Stage III "Trac" cam
- 258/258 @ .050 .578/.578 lift, 110 LSA
- 594hp, 543 lb-ft of torque
Katech value 427 short block 11:1CR. -> https://ls1tech.com/forums/generation-iv-internal-engine/548511-katech-value-427-short-blocks.html
Katech Stage 3 LS6 heads w/ 2.100 intake valves
LS6 intake manifold
Donaldson blackwing airbox
MEFI controller
Dyno headers
Test 2: (C4-3481 - blue) Katech Stage III "Trac" cam
- 258/258 @ .050 .578/.578 lift, 110 LSA
- 594hp, 543 lb-ft of torque
Get those tq numbers up as close to 600
Last edited by AU N EGL; 11-03-2006 at 02:02 PM.