Ordered my L76 intake last Thursday, got it today. If I had ordered it on Wednesday, I would have gotten it on Friday. Anyhow, snapped some pics next to my FAST 90mm, which is for sale by the way, and have attached them. Kit includes:

L76 intake
LS2 fuel rails
LS7 injectors
LS2/LS7 90mm throttle body w/actuator (for sale)
MAP sensor

 

So now you see it's a kick *** piece of hardware, just like I said, isn't it

 

Where did you order it from? How much was the whole "kit"?

 

280Z28, sure is. I'm gona use it until I have more funds for a sheet metal intake, then its in the hands of Beck.

Billiumss, I ordered mine through SDPC, part # 12590123.

 

Wanted a picture showing the intake port comparison fast90 to LS76

 

So this is the intake that mounts to the L92 heads? Does the intake itself make room for a cross brace and/or clear the hood? Thank you!

 

you can also find the intake on ebay

 

I've attached a pic of the intake ports in comparison to the FAST 90mm.

 

Thanks, those are some good comparison pictures. Fast should have originally made their intakes black, it looks so much better.

 

Sorry if this has been asked before...does it only work with the L92 heads?

Just looking for another intake alternative for an LS2 402 build...just don't like the F.A.S.T. LSX 90mm being the "only" option.

 

The L76 - yup, exclusive to one another.

 

Does it clear a Camaro hood?

 

does this bolt up to a LS2?

 

the l76 is supposed to outflow the fast intake,correct????

 

Ok this was answered literally 2 posts up.

That would be the least of your worries for sure.

It should flow very well, but I don't know about this one. If you divide by cost then absolutely yes though Kinda a moot point since the L76 and FAST will never bolt to the same heads.

 

Nope, the L76 ONLY bolts to the L92. Now if you're asking will the L92 bolt to the LS2...yes, it will.

 

I thought a mildly reworked L92 head and stock L76 intake outflows aftermarket catherdral heads with a ported FAST 90?

 

It does. I belive someone posted that the L76 intake flowed well into the 300's.

 

http://www.sdpc2000.com/catalog/1980...e-By-Wire-.htm

About how much power will the 40 pound injectors handle ?

 

Added it to my FAQ:

http://www.ls2.com/forums/showthread...hreadid=471223