Idle video - LS7 with 40 deg. overlap @ .050
01-11-2007, 08:58 PM
#24
Originally Posted by Billiumss
Sounds great!!
Any more specs on the car? What Cat Back are you running?
Any more specs on the car? What Cat Back are you running?
https://ls1tech.com/forums/generation-iv-internal-engine/496186-introducing-world-s-first-ls7-f-body.html
01-12-2007, 08:49 AM
#26
Originally Posted by DoesSpeedTurnUon
Jason, what hood is on that Z06 in the background?! Does anyone make one for a C5?
Yes
http://www.acproducts.us
01-12-2007, 09:01 AM
#27
10 Second Club
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Katech
a big one 
how big?? .650's and 260's?? or solid roller setup?? Just curious... it sounds mean...... I am thinking I want something close but not quite that crazy!
01-12-2007, 09:30 AM
#28
Originally Posted by Forteen3GT
how big?? .650's and 260's?? or solid roller setup?? Just curious... it sounds mean...... I am thinking I want something close but not quite that crazy!
01-13-2007, 10:40 PM
#29
How did you decide on an idle rpm? Would it idle any lower than 1100 or is that the minimum? The reason I ask is my 427 will have 42.5 degrees of overlap and i was going to try for a lower idle if it would run. Hoping for around 800 or so if possible. Trying to get more of a lope. However, yours sounds pretty badass at 1100. Thanks for any info you can provide.
01-14-2007, 09:29 AM
#30
Originally Posted by 03 BUSA
How did you decide on an idle rpm? Would it idle any lower than 1100 or is that the minimum? The reason I ask is my 427 will have 42.5 degrees of overlap and i was going to try for a lower idle if it would run. Hoping for around 800 or so if possible. Trying to get more of a lope. However, yours sounds pretty badass at 1100. Thanks for any info you can provide.
