Doesspeedturnuon inside......
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Doesspeedturnuon inside...... What is the latest and greatest on your L92 setup. Ive heard several rumors and I thought it'd be best for you to let the cat out. What were the final numbers on that beast!!!! 
Everyone is waiting bro.
Everyone is waiting bro. Any input on the DD issues? We've noticed that, if nothing else, they seem pretty unreliable.
out of 3 cars run on the same DD and then the sameDJ248, 1 was dead on, 1 was low on the torque measurement ( dont know how it could be off on torque, and not on HP) on the DD, and 1 was hi on the DD.
Sorry for the hijack. Just thought it would pertain.
out of 3 cars run on the same DD and then the sameDJ248, 1 was dead on, 1 was low on the torque measurement ( dont know how it could be off on torque, and not on HP) on the DD, and 1 was hi on the DD.
Sorry for the hijack. Just thought it would pertain.
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by edcmat-l1
Any input on the DD issues? We've noticed that, if nothing else, they seem pretty unreliable.
out of 3 cars run on the same DD and then the sameDJ248, 1 was dead on, 1 was low on the torque measurement ( dont know how it could be off on torque, and not on HP) on the DD, and 1 was hi on the DD.
Sorry for the hijack. Just thought it would pertain.
out of 3 cars run on the same DD and then the sameDJ248, 1 was dead on, 1 was low on the torque measurement ( dont know how it could be off on torque, and not on HP) on the DD, and 1 was hi on the DD.
Sorry for the hijack. Just thought it would pertain.
I do know that the dyno jet numbers were backed up on 3 different dyno jet units. All within 25 miles of each other so that says something. Of course there was about 10-15 hp variance in those but we've all come to accept that around here.
Trending Topics
Originally Posted by V6 Bird
Its a tuning device first and foremost. But to produce results over 100 or so HP off on 3 seperate cars and they all lost power on a dynojet seems fishy/unreliable/etc. I did notice that on the other graphs ive looked at on a DD unit they all have had a correction factor of some kind on the bottom of the graph. This one doesnt and the dynojets do. Something seems awry there as well.
Photoshop dyno chart for the win!!!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by V6 Bird
Its a tuning device first and foremost. But to produce results over 100 or so HP off on 3 seperate cars and they all lost power on a dynojet seems fishy/unreliable/etc. I did notice that on the other graphs ive looked at on a DD unit they all have had a correction factor of some kind on the bottom of the graph. This one doesnt and the dynojets do. Something seems awry there as well.
I do know that the dyno jet numbers were backed up on 3 different dyno jet units. All within 25 miles of each other so that says something. Of course there was about 10-15 hp variance in those but we've all come to accept that around here.
I do know that the dyno jet numbers were backed up on 3 different dyno jet units. All within 25 miles of each other so that says something. Of course there was about 10-15 hp variance in those but we've all come to accept that around here.
And as far as the DJs being off 10-15 each, on a 500 hp motor( or close to it) that s only 2-3%. Thats pretty repeatable in my book.
v6BIRD`
i was at xtreme when the 550 rwhp was hit and the 3 pulls running up to it. i talked to him about what he dynoed on the the other 3 dynos also. if you already heard what the dynos are why have this thread?
i was at xtreme when the 550 rwhp was hit and the 3 pulls running up to it. i talked to him about what he dynoed on the the other 3 dynos also. if you already heard what the dynos are why have this thread?
Last edited by SUTTERERMAN85; Feb 20, 2007 at 05:16 PM.
Originally Posted by SUTTERERMAN85
v6BIRD`
i was at xtreme when the 550 rwhp was hit and the 3 pulls running up to it. i talked to him about what he dynoed on the the other 3 dynos also. if you already heard what the dynos are why have this thread?
i was at xtreme when the 550 rwhp was hit and the 3 pulls running up to it. i talked to him about what he dynoed on the the other 3 dynos also. if you already heard what the dynos are why have this thread?
We know about RPM, USA,.... is the 3rd one Alamo??
Originally Posted by Forteen3GT
Rumors are rumors until they are verified as the truth....... 3 others??
We know about RPM, USA,.... is the 3rd one Alamo??
We know about RPM, USA,.... is the 3rd one Alamo??
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by SUTTERERMAN85
v6BIRD`
i was at xtreme when the 550 rwhp was hit and the 3 pulls running up to it. i talked to him about what he dynoed on the the other 3 dynos also. if you already heard what the dynos are why have this thread?
i was at xtreme when the 550 rwhp was hit and the 3 pulls running up to it. i talked to him about what he dynoed on the the other 3 dynos also. if you already heard what the dynos are why have this thread?
all i am saying is that i was at xtreme when it was on the dyno and i saw everything that was going on. they put it on there and ran it like i have seen other cars run before. nothing special done to it. that is what there machine said. i dont want to agrue about this and turn it into a pissing contest, there is no need for that. he told me what it put down on the other dynojets also. maybe there is something wrong with xtreme's dyno, maybe there isnt. the machine read what was said. and that is all i going to say.
Teching In
Joined: Jan 2007
Posts: 41
Likes: 0
From: Jasper,AL
Besides the point of all the arguement of all the dynos and shops...I've noticed that everyone thinks the l92 and l76 can make this big hp number. Seriously, it's a factory head. I know some people are going to mention the flow, but after market is simply specialized in what they are built for. They are putting them on high output trucks and caddies. Should this evidence be enough from GM? Maybe I am being bias against them, either way I'm leary of this setup on a 408. So I'm going with a CNC's head and an intake made for what I am building.
Teching In
Joined: Jan 2007
Posts: 41
Likes: 0
From: Jasper,AL
Basically an arguement over dyno numbers from a shop. They haven't found out why the particular shops dyno is giving a significant amount of horsepower over other dynos. Also, what the l92, l76 combo can render in horsepower on a an individuals 403.
Thread Starter
TECH Senior Member
iTrader: (15)
Joined: Nov 2001
Posts: 5,109
Likes: 0
From: Grand Prairie, TX
Originally Posted by Louis
Bring it over, Ill put it on the rollers no charge. Mine is with in 3 of thunders, and on par with the majority of local shops here in Dallas.
RPM did the original exposing dyno. That really woke the world up with shocking new. Then it was dyno'ed on Alamo's, and then USA Motorsports. This is hear say as I haven't contacted the shop owners for verification at this time. I wouldnt doubt it not true either.