Head Gasket setup for extreme combo
#42
Originally Posted by RUTAN TA
I have been through 2 sets of SCE and will NEVER buy another pair! I have a RA of 10-12 on the deck and heads,I am also using arp studs. I was told to heat cycle them and retorque the heads, and still leaks oil/coolant! I have felpro MLS's on the way,If they stay sealed Ill let you know how they hold up to a 300 shot.
Originally Posted by LS1curious
Field reports I have heard so far have been mixed. Could be the technology needs time to progress a bit more.
Originally Posted by Phil99vette
I heard it lets go around 1300rw.
Trying to figure out what head gaskets to run is getting really tough for me.
#43
8 second mod
iTrader: (37)
Joined: Nov 2002
Posts: 17,879
Likes: 1
From: East Side Performance! mASShole
i tryed the gm mls, no go
cometic mls worked well
copper titan (made for non groved block/head) worked like **** and leaked
fel bro mls best so far. i accually have a set on my car now that are reused, lol they seem to work very well. they have a coating on them that is real good.
so far so good with them, im not 2,000 hp, but 800 ish on spray is probably pretty close to as hard on parts as 1500 on FI. lol
cometic mls worked well
copper titan (made for non groved block/head) worked like **** and leaked
fel bro mls best so far. i accually have a set on my car now that are reused, lol they seem to work very well. they have a coating on them that is real good.
so far so good with them, im not 2,000 hp, but 800 ish on spray is probably pretty close to as hard on parts as 1500 on FI. lol