925.7 @ 9600RPM Flywheel HP NA
10-06-2007 | 05:33 PM
#25
9 Second Club
Joined: Nov 2003
Posts: 13,616
Likes: 180
From: Norn Iron
If this is an old style camcorder, you will need some sort of TV/Tuner card so you can save the video to the PC.
Im not sure what options are available in the US, but I used a Hauppage WinTV tuner card for my computer when I had an old VHC-S camcorder a few years back. Just hook up the Phono leads to the card for audio/video to save.
Once saved onto the PC, you can upload then.
And bloody impressive result, those rpm's are scary, even in a multivalve motor !!!!
Im not sure what options are available in the US, but I used a Hauppage WinTV tuner card for my computer when I had an old VHC-S camcorder a few years back. Just hook up the Phono leads to the card for audio/video to save.
Once saved onto the PC, you can upload then.
And bloody impressive result, those rpm's are scary, even in a multivalve motor !!!!
10-06-2007 | 09:16 PM
#32
10-06-2007 | 10:31 PM
#36
Restricted User
Joined: May 2006
Posts: 132
Likes: 0
From: virginia
Good Job thanking Erik Koenig for all his work 
Oh yeah you tightened the bolts and nuts down that means it's all you.... sorry.
FWIW Robins old N2O motor made 930hp NA before the bottle so cathedral port or not who cares?
Oh yeah you tightened the bolts and nuts down that means it's all you.... sorry.FWIW Robins old N2O motor made 930hp NA before the bottle so cathedral port or not who cares?
Last edited by Jessica; 10-06-2007 at 11:10 PM.
10-06-2007 | 11:13 PM
#38
TECH Resident
Joined: Dec 2001
Posts: 922
Likes: 1
From: Lexington Park, MD
