mEthOdsOMahAn

i would like to hear suggestions for a good ,mostly strip cam, for a carbed, L92 headed ,6. . lots of nitrous is also planned

JPH

iTrader: (2)

246/262 .624/.624 113, would like more info though.

NemeSS

iTrader: (127)

LPE GT11 cam has profile that would seem friendly to a l92/ls3 setup.
although it does not have a lot of duration on the exhaust, it is very aggressive and has unusual hi lobe lift for a cam with less than 220* duration on the intake side

mEthOdsOMahAn

ttt..

mEthOdsOMahAn

i have a stock truck 6.0 bottom end . new cnc l92s and trying to aquire a victor jr .this will be in a 2900lb fox mustang . i am going with a 350 turbo or power glide . i am not worried with street manners , just quick ets i have no idea which cam to go with or where to get it . i am also tossing around buying a stroker rotating assy .

holley505

iTrader: (1)

I am running a TSP 418 LS3 with a Carb. Vic jr intake. However I do not have L92 heads. I have AFRs

My cam is a somewhat popular people like or they tried it and dont.

236/240 604/612 112lsa This cam was suggested to me be the people at TSP if I am running a Carb and Tony Mamo agree it should work well with my other parts. So we will see. No Numbers yet ... I am almost done building it.

DMMizell

iTrader: (1)

You may want to consider the Rapid Dominator 2X,
seems to work in my 6.0/l92 Fox, has gone 9's at 137 NA.
http://www.youtube.com/watch?v=idmuZ...e=channel_page

Dave

1961ba427

iTrader: (26)

Just read a magazine article on your car, DMMizell. Very nice.

Gray86hatch

iTrader: (83)

Www.flowtechinduction.com

Tim

LS6

keep us posted for the single digit