As many of you have seen we build some very impressive HIGH HP builds and have thoroughly enjoyed building these monster LS and LT cars. We recently completed a build for our customers C7 Grand Sport. Tim came in with a very specific goal for the car. Tim is an auto enthusiast thru and thru. Having owned several great performance vehicles and spending a lot of time at HPDEs, Track Days, Road Racing and spirited mountain runs he knew he wanted to stay naturally aspirated on this vehicle. Tim’s goal was to max out the stock bottom end of the LT1 on 93 Pump Gas and make great N/A power. There was something quite refreshing about going back to the basics. Knowing this Grand Sport would see a good amount of hard Track and Fun driving we decided on our Stage IV performance package with a few additions. This combination consisted of the following modifications:



• MSD AirForce Intake Manifold
• Nick Williams 102mm DBW Throttle Body
• Halltech Cold Air Induction
• Vengeance Racing Cam Kit Plus - Stage III Camshaft
• Vengeance Racing CNC Ported LT1 Cylinder Heads
• American Racing 1 7/8” stainless headers with catted X pipe
• Vengeance Racing High Temp Heat Protective Heat Sleeves
• 160* Thermostat
• Vengeance Racing Gen V Catch Can


To get this N/A build to breathe we started with a Halltech Cold Air Intake as well as a Nick Williams 102mm throttle body and a Vengeance Racing Ported MSD AirForce Intake Manifold. We have found this to be the ultimate modification for the air intake system on these vehicles and offer our proven porting service on any MSD or FAST intake manifold that we sell here.









For the valvetrain, we utilized a set of LT1 cylinder heads ported by LME and our Vengeance Racing Cam Kit Plus with our LT1 Stage III Camshaft. The Vengeance Racing Cam Kit Plus features:

- Vengeance Racing Custom Camshaft w/ 32% Fuel Lobe Upgrade
- BTR .660" Lift Dual Valve Spring Kit w/ Ti Retainers
- Vengeance Racing 3/8" Hardened Pushrods
- C5R Timing Chain
- CompCams Trunion Upgrade
- CompCams Phaser Limiter
- GM VVT Cam Bolt
- GM Crank Bolt
- GM LS7 Lifter Set
- GM Lifter Trays
- GM MLS 6.2L Head Gaskets
- GM LT Exhaust Gaskets
- DOD Delete Plug Kit
- ARP Cylinder Head Bolt Kit



Our Vengeance Racing Stage III LT1 Camshaft is our max-effort camshaft for the LT1 engine and gives a very aggressive lope at idle. To move all this air out of the motor quickly we installed an American Racing Header System with their full 3” x-pipe. This combined with the stock dual valve mufflers gave out customer the sound he was looking for.












With the install complete it was time to head to the dyno to see what this NA Grand Sport put to the wheels. On 93 Pump Gas, Tim’s Grand Sport made 569rwhp and 463rwtq.






We look forward to seeing this car at some track days and Car meets this year. We were very excited to see this much power out of a Naturally Aspirated LT1 and know that Tim is going to love this setup. If you are interested in a similar build feel free to contact us at Sales@VengeaneRacing.net. We are happy to discuss your build with you.











Check out more of our Feature Builds, Performance Packages and Products at our website https://vengeanceracing.net/index.html. We have a wide range of performance parts on our online store for your LS or LT build. Feel free to contact us with any questions at Sales@VengeanceRacing.net or by phone @ 678-513-7105. We look forward to hearing from you.


And as always be sure to Like, Follow and Subscribe to Vengeance Racing on Social Media.
FaceBook @ Vengeance Racing
Instagram @ Vengeance Racing
YouTube @ Ronatvengeance