New guy from texas
New guy from texas whats up everyone...I'm Eric new to the forum I'm from San Antonio Texas i drive a 1999 Camaro Z28 full bolt-on's with some suspension my best time was a 12.5 So my next step is a cam cant wait 
Either cam would be a good choice. You planning on gettin it from Texas Speed? The ms3 is a good cam, but so is the torquer. Personally, I would go with a little bit smaller cam and a good set of heads, more under the curve power, or just use one of those cams with some heads.
yeah im gna order the MS3 from texas speed....i was thinking of getting the the stage 2.5 z06 heads or the 5.3l stage 2.5 heads they said those r good too..idk still undecided what heads too go with..need to look around some more
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I only have bolt-ons for now, I have a lid, maf, p/p tb, 3" catback with cutout, and no cats. I have basically a full hooker exhaust,that I haven't put on yet. Lt headers, 3" y-pipe, hooker aerochamber muffler, and the exhaust tips from hooker as well. I am just gonna replcae the muffler on the exhaust that I have now and the tips.
I have some pretty big plans for it, so that's pretty much why it has just been tho bolt-ons for a while now, saving the money.
I would like to get a stroker kit for it, 383, and get the h/c to match for a lower compression motor for boost. I kinda want a procharger, or a turbo setup, and then a 9' rear with 3.73s, a lvl3 trans with a vig 3600, and then suspension work.
But for now seeing as how it is my dd, I may just put a small cam in it and about a yank 3200 or so, and call it good until I get all the money I will need saved up. I have started working on the saving, but that's alot of money lol.
I have some pretty big plans for it, so that's pretty much why it has just been tho bolt-ons for a while now, saving the money.
I would like to get a stroker kit for it, 383, and get the h/c to match for a lower compression motor for boost. I kinda want a procharger, or a turbo setup, and then a 9' rear with 3.73s, a lvl3 trans with a vig 3600, and then suspension work.
But for now seeing as how it is my dd, I may just put a small cam in it and about a yank 3200 or so, and call it good until I get all the money I will need saved up. I have started working on the saving, but that's alot of money lol.
yeah i hear u on the cash everything is preety expensive..u got the super comps hookers or what....have u takin ur car to the track..what part of texas ur from?
man dude i noticed alot after i put in my stall and a tune i used to run 13.2's without a stall and a tune but i had all my bolt-ons on but my car ran crappy that day when i put on the 30 pound injectors.....i put the stall and tuned it it ran a 12.6...i put the suspension that i have now 12.5's not bad huh
man dude i noticed alot after i put in my stall and a tune i used to run 13.2's without a stall and a tune but i had all my bolt-ons on but my car ran crappy that day when i put on the 30 pound injectors.....i put the stall and tuned it it ran a 12.6...i put the suspension that i have now 12.5's not bad huh
Yeah, I got the super comps, ceramic coated. A 12.5 is nice man, I've never gotten down to a track, but I know my car runs strong. I'm shootin to get it into the mid 12's just for dd duty, and then when I get a new dd, put it in the garage and seriously go to work.
I'm from north central texas, about 45 minutes from Wichita Falls if you know where that is.
I'm from north central texas, about 45 minutes from Wichita Falls if you know where that is.
Welcome to the site. Nice ride, and great times! This is the place to be if your planning on continuing modding/improving your ride. Lots of experienced folks on here and a wealth of information is all here just at the touch of the search button when you have questions on tried and true cam/head packages etc. Good luck in your modding and hope to see you around often. 
Yeah, I got the super comps, ceramic coated. A 12.5 is nice man, I've never gotten down to a track, but I know my car runs strong. I'm shootin to get it into the mid 12's just for dd duty, and then when I get a new dd, put it in the garage and seriously go to work.
I'm from north central texas, about 45 minutes from Wichita Falls if you know where that is.
I'm from north central texas, about 45 minutes from Wichita Falls if you know where that is.
nice super comps ceramic coated...yeah i hear u man...i have another vehicle too but i wrecked it
but its almost dont tho nothing major just lil things..once i get it going im gna cam my car cant wait ..i dont know where that is..is a small town or what
thanx man.. really i got some friends that live at corpus they always invite me to go but i nvr get the chance to head up there..but ill go someday been wanting to go to the beach
what do u got on ur trans am....do u go to any car meets here in san antonio
Welcome to the site. Nice ride, and great times! This is the place to be if your planning on continuing modding/improving your ride. Lots of experienced folks on here and a wealth of information is all here just at the touch of the search button when you have questions on tried and true cam/head packages etc. Good luck in your modding and hope to see you around often.
thanks alot bud your right theres alot of good advice here im planning on going cam next
