New from Ohio
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Proctorville, OH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
New from Ohio
Congratulations on an awesome forum!
I'm diving in on my first LS* project and decided to do it because of all the greate information and guidance posted and shared on this site.
Recent acquisitions:
Bare LQ4 Iron 6.0 block
Stock LS1 Crank
Stock LS6 4.000 flat top pistons and rods
Bare L92 heads
Should keep me busy and poor as the project goes on.
I'm diving in on my first LS* project and decided to do it because of all the greate information and guidance posted and shared on this site.
Recent acquisitions:
Bare LQ4 Iron 6.0 block
Stock LS1 Crank
Stock LS6 4.000 flat top pistons and rods
Bare L92 heads
Should keep me busy and poor as the project goes on.
Last edited by bgoodeno; 11-24-2009 at 06:42 PM.
#5
Banned
Join Date: May 2009
Location: Washington Township - Ohio
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
#7
Launching!
Welcome brother.
Yeah some of us are still here in Dayton.
I'm in the engineering side of mfg and things are lean for sure.
This is a great site. Use the search feature above and you will find all
the answers and suggestions you need.
Yeah some of us are still here in Dayton.
I'm in the engineering side of mfg and things are lean for sure.
This is a great site. Use the search feature above and you will find all
the answers and suggestions you need.
Trending Topics
#8
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: Proctorville, OH
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the Welcome!!!!
Yes this site and the people on it are full of all sorts of great information. I'm not a real gear head....and I have limited time.
This resource is temendous for me...horrible for my @work habits though.
Yes this site and the people on it are full of all sorts of great information. I'm not a real gear head....and I have limited time.
This resource is temendous for me...horrible for my @work habits though.