Procharged SOM WS6
Thread Starter
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
Procharged SOM WS6 Well, I thought I could start posting here instead of lurking and learning. Friday, I flew from MN to MI to get my first LS1 car.
It is a 2001 Trans Am WS6 with a D1SC Procharger. I bought the car from another member of the forum. He had a post in the FI section with the 475.3 HP dyno numbers on a Mustang. I am new to the FI part, but absolutely love driving the car.
I drove it 750 miles home, with the a/c on and a load of parts in the back and got 27 mpg! I have been out of the streets a little bit and the car is a blast. I need to get a 9" but I am sure that will soon come. Just thought I would throw a few pics up and try to become a "true member" of the forum.
I also got a set of 18" C5 Z06 rims. The two rear tires are bald and I should be getting tires this week and will get those posted with the rims and after I wax the car. I was able to wash it a bit today. The pics were taken slightly afterthat. I haven't looked into the whole photoshopping of pictures so they probably aren't the best.
It is a 2001 Trans Am WS6 with a D1SC Procharger. I bought the car from another member of the forum. He had a post in the FI section with the 475.3 HP dyno numbers on a Mustang. I am new to the FI part, but absolutely love driving the car.
I drove it 750 miles home, with the a/c on and a load of parts in the back and got 27 mpg! I have been out of the streets a little bit and the car is a blast. I need to get a 9" but I am sure that will soon come. Just thought I would throw a few pics up and try to become a "true member" of the forum.
I also got a set of 18" C5 Z06 rims. The two rear tires are bald and I should be getting tires this week and will get those posted with the rims and after I wax the car. I was able to wash it a bit today. The pics were taken slightly afterthat. I haven't looked into the whole photoshopping of pictures so they probably aren't the best.
Thread Starter
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
I have seen a bunch of your posts on here as well as on the MN F-body site.
It will take a little time, but as soon as I get a 9", I will be taking it to Cedar Falls to see what it runs.
It will take a little time, but as soon as I get a 9", I will be taking it to Cedar Falls to see what it runs.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
The last owner never had the car to the strip. He had it tuned last Monday and I picked it up on Friday. I bought the car, drove it for a while and then put the Procharger on. I think he only put 800 miles on the car.
Thread Starter
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
I am in Rochester. I haven't used IM in some time. I might have to start using that again. I will have to see what I am up to this weekend. There is some people in the cities that I need to see. So I might see a possible trip up there. I will keep in touch.
Nice car. To help pay for that 9"... I just put my same ws6 wheels and Good tires on ebay and they went for 1125+150 shipping. They sell like diamonds on ebay! Just thought i'd give you a heads up! Welcome to LS1Tech!
Thread Starter
Joined: Apr 2007
Posts: 843
Likes: 69
From: Rochester, MN
I would like to buy the 9", driveshaft, torque arm, and torque arm relocation kit all at once. I have a 2nd gen Camaro that is for sale and should that sell, Bob at EPP will be receiving an order right away for these items!
I will have to give some thought to selling the WS6 wheels. Thank you.
Ls1tech is awesome, I spend way too much time on here already!!
