HID alternative?
www.ddmtuning.com has HID kits for $30 and about $15 for shipping per order. Almost any bulb type and temperature you want and they have a LIFETIME WARRANTY! Have had many of these sets and so do my friends, never had a problem!
On The Tree
Joined: Sep 2007
Posts: 164
Likes: 0
From: Dayton, OH
I ran the 6k xenon factory replacements and foglights in my old 02 GTP.
They were very bright and a great price. Plus I think the owner is/was a member of Club Grand Prix.
http://autolumination.com/headlights.htm
They were very bright and a great price. Plus I think the owner is/was a member of Club Grand Prix.
http://autolumination.com/headlights.htm
On The Tree
Joined: Jul 2009
Posts: 115
Likes: 0
From: Wisconsin
Nacho is right, it should be the end of this! unfortunatly, the "raptor" brand on that website is currently out of stock on almost everything but i called them today and they said they would have more stock soon! Also, never had to buy any harness to keep them from blinking either. Most kits are simple plug and play, some odd ones like the fogs on my G8 (5202) you have to get the right wire ends to plug into the factory harness or just hardwire them like I did. I just kept the connectors so if i ever want to get rid of the car and keep the HID's i can just hardwire the factory bulb connector back on.
Launching!
Joined: Jun 2008
Posts: 210
Likes: 0
From: Oak Creek, WI
I just installed my 5000K lows and fogs from DDM tuning and its a great kit. I got the slim ballast, and no flicker at all. I'm thinking of getting them for the wifes explorer now, because i've never seen so well driving at night.
Nacho is right, it should be the end of this! unfortunatly, the "raptor" brand on that website is currently out of stock on almost everything but i called them today and they said they would have more stock soon! Also, never had to buy any harness to keep them from blinking either. Most kits are simple plug and play, some odd ones like the fogs on my G8 (5202) you have to get the right wire ends to plug into the factory harness or just hardwire them like I did. I just kept the connectors so if i ever want to get rid of the car and keep the HID's i can just hardwire the factory bulb connector back on.
I want to know what is so special about the H11 bulbs?
and... has anyone used the HIR(Halogen infrared reflecting bulbs)???
My brother told me to check them out, and they sound great.
and... has anyone used the HIR(Halogen infrared reflecting bulbs)???
My brother told me to check them out, and they sound great.
Last edited by BadA$$; Feb 2, 2010 at 12:07 AM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
we are learning about lighting in school right now (architecture) but hids with balasts take a substantial ammount of power compared to normal (i think 10-15 percent)lighting i wonder how much juice it takes from your coils.... they are a great look, but balasts depending on what type you use can be really finiky especially for warm up and areas with cold weather start up
we are learning about lighting in school right now (architecture) but hids with balasts take a substantial ammount of power compared to normal (i think 10-15 percent)lighting i wonder how much juice it takes from your coils.... they are a great look, but balasts depending on what type you use can be really finiky especially for warm up and areas with cold weather start up
Not till you pull enough amps for long enough time to melt the stock wiring. The current draw can be significant enough to melt the insulation and cause fires. That the reason that a relay harness should be used. It will use the headlight power to trigger the relay not the balast. Just a safety for your vehicles wiring/electrical system.
I've heard 35W is perfect for fogs, 55W can blind oncoming traffic as there is no adjustment to correct alignment. 55W will work good for headlights as they are adjustable. HID's ive been told actually run cooler than traditional halogen bulbs, that may be just the 35W though I don't know.
TECH Fanatic
Joined: Apr 2009
Posts: 1,137
Likes: 0
From: nj
ill take some pics tonight. i have before and after pics but the afters were in the rain. ill post them later. im running the 35w in the lows and the fogs with no problem. no one flashing me the beams cause theyre to bright. i also havent suffered any flickering or what not.
I'm never going to finish hahahaha TECH Fanatic
Joined: Apr 2009
Posts: 1,137
Likes: 0
From: nj
hope your buddy buddy with whoever's doing your tunes cause that could get costly. i want to get those headers in a pretty bad way. i gotta sell some stuff though. the woman will skin me alive if i get them im still negotiating.
