Looking for a CAI
Teching In
Joined: Feb 2010
Posts: 24
Likes: 0
From: Milwaukee
why dont you make one? http://www.verociousmotorsports.com/ they sell aluminum tubing reasonably inexpensive. beats the chrome plated plastic from autozone.
Teching In
Joined: Feb 2010
Posts: 24
Likes: 0
From: Milwaukee
lol wasnt the school of self accomplishment and pride any good to you? they have polished aluminum get some brushed stainless flashing from home depot and youll have one just as good and twice as better looking
A manufactured product that's proven to work > home made parts most of the time.
I'm not knocking someone who can make a nice, quality part themselves. But I'm with Bama on this one, why not spend a couple bucks and get something that's proven to work and that is manufactured to the specific need?
I'm not knocking someone who can make a nice, quality part themselves. But I'm with Bama on this one, why not spend a couple bucks and get something that's proven to work and that is manufactured to the specific need?
Teching In
Joined: Feb 2010
Posts: 24
Likes: 0
From: Milwaukee
i guess it makes a difference if you have the access to tools to make parts and what not. im not knockin store baught stuff but when you really think about it a, 300 dollar k&n kit is nothing more than their cone filter, and 4 inch plastic tubing.
Post pics of your set up. I've only seen a couple home made intake kits that actually look worth a damn. I paid $230 for my K&N with no regrets. I couldn't make it myself for a low cost lol
Trending Topics
4" plastic tubing with a smooth taper for a MAF housing so that you still get proper flow for a good reading. I'm just saying, I'm willing to spend $200 or more on a well made intake that'll make maybe 10hp rather than spend 100 or 150 building one myself that may make 5hp.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I'm a college student as well. I think we're a pretty young board, overall. Most of us are teens and twenties. Fresh minds! lol
Teching In
Joined: Feb 2010
Posts: 24
Likes: 0
From: Milwaukee
thats off my gtp which is bone stock other than that intake. sure makes that blower sound nice though scares people when you womp the throttle a bit im . i made it when i was workin for a corvette shop in chicago did the trick and was 200 bucks cheaper than a store bought one. and nothing came from autozone or pepboys lol.
Real Home made CAI with air box Made this myself with sheet aluminum, (not thin flashing) some lexan and a silicon 3.25" elbow. Its insulated and has a lower compartment for the engine and tranny computers. This is the third one I have made. I made one for my 2001 Monte SS, my 2005 GTP also. This one is in my 2007 Monte SS.
TECH Apprentice
Joined: Jul 2005
Posts: 360
Likes: 0
The money for the K&N or any other of these is not worth it. Its not the RnD its just the name. Does it give some improvement yes but not at the price.
The fender well intakes are your best bet for performance gains. And a lot chepaer too. and they do have a rep that backs the claims.
I learned my lesson when I had my Camaro and all the intakes they had for those..sometimes the most expensive is not always the best.
The fender well intakes are your best bet for performance gains. And a lot chepaer too. and they do have a rep that backs the claims.
I learned my lesson when I had my Camaro and all the intakes they had for those..sometimes the most expensive is not always the best.
Teching In
Joined: Feb 2010
Posts: 24
Likes: 0
From: Milwaukee
The money for the K&N or any other of these is not worth it. Its not the RnD its just the name. Does it give some improvement yes but not at the price.
The fender well intakes are your best bet for performance gains. And a lot chepaer too. and they do have a rep that backs the claims.
I learned my lesson when I had my Camaro and all the intakes they had for those..sometimes the most expensive is not always the best.
The fender well intakes are your best bet for performance gains. And a lot chepaer too. and they do have a rep that backs the claims.
I learned my lesson when I had my Camaro and all the intakes they had for those..sometimes the most expensive is not always the best.
i completely agree. fenderwell kits offer the most gain because your going to see the coldest air. i must have paid..180 bucks for the tubing and filter (i got a k&n with the extreme lid) i made it where just a bit hung below the valence on the front end
TECH Apprentice
Joined: Jul 2005
Posts: 360
Likes: 0
yea..that is a decent deal..again do not expect the HP claims..been there done that...the fenderwell is the one that gives you that power..these boxed ones just give you a nice looking intake..
post pics of this or the link to the ebay auction..AND make sure it is a K&N..and not some cheap Chinese rip off they are selling you.
post pics of this or the link to the ebay auction..AND make sure it is a K&N..and not some cheap Chinese rip off they are selling you.
