ZZP Milled TBody
I was looking to see what else I could find for our cars and found this. I ordered it and it look like a nice piece. And yes, it does fit fine. It has an 8 pin connector already too. This one lets the TB open 100% as ours from the factory only opens 88%. Should be a good add on especially with headers.
http://www.zzperformance.com/cobalt_...=999&catid=174
-Mike
http://www.zzperformance.com/cobalt_...=999&catid=174
-Mike
TECH Enthusiast
Joined: Jul 2008
Posts: 703
Likes: 0
From: Atlanta Georgia USA
It is milled too. I noticed an improvement even without my ported intake and with the ported intake it is even better. It isn't a full ported TB. It is milled meaning not as much metal is removed which means it will not throw codes. If people do not want to use it then don't but to say that it doesn't work is wrong especially since I have tested it. I am not the only one to notice improvements. The hole is larger than a stock TB. I hope this helps.
-Mike
-Mike
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo TECH Enthusiast
Joined: Jul 2008
Posts: 703
Likes: 0
From: Atlanta Georgia USA
It is milled too. I noticed an improvement even without my ported intake and with the ported intake it is even better. It isn't a full ported TB. It is milled meaning not as much metal is removed which means it will not throw codes. If people do not want to use it then don't but to say that it doesn't work is wrong especially since I have tested it. I am not the only one to notice improvements. The hole is larger than a stock TB. I hope this helps.
-Mike
-Mike
Hmmmm,....I wonder did they raise it up because they know of the potential buyers coming up??!
It is milled too. I noticed an improvement even without my ported intake and with the ported intake it is even better. It isn't a full ported TB. It is milled meaning not as much metal is removed which means it will not throw codes. If people do not want to use it then don't but to say that it doesn't work is wrong especially since I have tested it. I am not the only one to notice improvements. The hole is larger than a stock TB. I hope this helps.
-Mike
-Mike
Staging Lane
Joined: May 2010
Posts: 63
Likes: 0
From: rolling meadows
even if it did nothing I thought about buying one to send it out and get ported from fasterproms. It was a good core for cheap. Oh well anyway to make a buck I guess, now they wont sell any and it wont do them any good raising the price.
TECH Enthusiast
Joined: Jul 2008
Posts: 703
Likes: 0
From: Atlanta Georgia USA
Launching!
Joined: Jun 2009
Posts: 223
Likes: 0
From: Bury St Edmunds, England